Precision, 200-μA Supply Current, 2.7-V to 36-V Supply Instrumentation Amplifier with Rail-to-Rail Output INA826AIDR
led diode za tablice
,led diode strip
Precision, 200-µA Supply Current, 2.7-V to 36-V Supply
Instrumentation Amplifier with Rail-to-Rail Output
FEATURES
• Input Common-Mode Range: Includes V–
• Common-Mode Rejection:
– 104 dB, min (G = 10)
• Power-Supply Rejection: 100 dB, min (G = 1)
• Low Offset Voltage: 150 µV, max
• Gain Drift: 1 ppm/°C (G = 1), 35 ppm/°C (G > 1)
• Noise: 18 nV/√Hz, G ≥ 100
• Bandwidth: 1 MHz (G = 1), 60 kHz (G = 100)
• Inputs Protected up to ±40 V
• Rail-to-Rail Output
• Supply Current: 200 µA
• Supply Range:
+2.7 V TO +36 V
• Specified Temperature Range:
–40°C to +125°C
• Packages: MSOP-8, SO-8 and DFN-8
RELATED PRODUCTS
| DEVICE | DESCRIPTION |
| INA333 |
25-µV VOS, 0.1 µV/°C VOS drift, 1.8-V to 5-V, RRO 50-µA IQ, chopper-stabilized INA |
| PGA280 |
20-mV to ±10-V programmable gain IA with 3-V or PGA280 5-V differential output; analog supply up to ±18 V |
| INA159 |
G = 0.2 V differential amplifier for ±10-V to 3-V and 5-V conversion |
APPLICATION INFORMATION
Figure 58 shows the basic connections required for operation of the INA826. Good layout practice mandates the use of bypass capacitors placed as close to the device pins as possible. The output of the INA826 is referred to the output reference (REF) terminal, which is normally grounded. This connection must be low-impedance to assure good common-mode rejection. Although 5 Ω or less of stray resistance can be tolerated while maintaining specified CMRR, small stray resistances of tens of ohms in series with the REF pin can cause noticeable degradation in CMRR.
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes
| Image | Part # | Description | |
|---|---|---|---|
|
|
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL |
10 kOhms ±5% 0.063W, 1/16W Chip Resistor 0402 (1005 Metric) Moisture Resistant Thick Film
|
|
|
|
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603 |
30 Ohms 1 Power Line Ferrite Bead 0603 (1608 Metric) 5A 10mOhm
|
|
|
|
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC |
22 Ohms ±5% 0.1W, 1/10W Chip Resistor 0402 (1005 Metric) Automotive AEC-Q200 Thick Film
|
|
|
|
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm |
750 V 6.5 kA Varistor 1 Circuit Through Hole Disc 20mm
|
|
|
|
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor |
Bipolar (BJT) Transistor PNP 60 V 3 A 50MHz 1 W Surface Mount D-Pak
|
|
|
|
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A |
N-Channel 300 V 140A (Tc) 1040W (Tc) Through Hole TO-264AA (IXFK)
|
|
|
|
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes |
47V Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount USC
|
|
|
|
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123 |
Diode 60 V 1A Surface Mount SOD-123W
|
|
|
|
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC |
Diode 40 V 3A Surface Mount DO-214AC, SMA
|
|
|
|
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes |
9.2V Clamp 65.3A Ipp Tvs Diode Surface Mount DO-214AA (SMBJ)
|