Send Message
Home > products > Power Management ICs > TPS650250QRHBRQ1 Power Management Ic Circuit Board Chips For Li-Ion Powered Systems

TPS650250QRHBRQ1 Power Management Ic Circuit Board Chips For Li-Ion Powered Systems

manufacturer:
Manufacturer
Description:
Battery Power Management IC Lithium Ion/Polymer 32-VQFN (5x5)
Category:
Power Management ICs
Price:
0.1USD
Payment Method:
T/T, Western Union,Paypal
Specifications
Features:
Qualified For Automotive Applications
Voltage:
3.3V Or 2.8V
Output Voltage:
Adjustable
SIZE:
2 × 200mA General Purpose LDOs
DESCRIPTION:
An Integrated Power Management IC
Type:
Management IC
Highlight:

circuit board ic

,

electronic chip board

Introduction
 
 
TPS650250QRHBRQ1 POWER MANAGEMENT IC
 
FEATURES
Qualified for Automotive Applications                                   
1.6A, 97% Efficient Step-Down Converter for
System Voltage (VDCDC1)
– 3.3V or 2.8V or Adjustable
0.8A, up to 95% Efficient Step-Down Converter
for Memory Voltage (VDCDC2)
– 1.8V or 2.5V or Adjustable
0.8A, 90% Efficient Step-Down Converter for
Processor Core (VDCDC3)
Adjustable Output Voltage on VDCDC3
 
30mA LDO for Vdd_alive
2 × 200mA General Purpose LDOs (LDO1 and
LDO2)
Dynamic Voltage Management for Processor
Core
LDO1 and LDO2 Voltage Externally Adjustable
Separate Enable Pins for Inductive Converters
2.25MHz Switching Frequency
85mA Quiescent Current
Thermal Shutdown Protection
 
DESCRIPTION
The TPS650250 is an integrated Power Management IC for applications powered by one Li-Ion or Li-Polymer cell, which require multiple power rails. The TPS650250 provides three highly efficient, step-down converters targeted at providing the core voltage, peripheral, I/O and memory rails in a processor based system. All three step-down converters enter a low power mode at light load for maximum efficiency across the widest possible range of load currents. The converters can be forced into fixed frequency PWM mode by pulling the MODE pin high. The TPS650250 also integrates two general purpose 200mA LDO voltage regulators, which are enabled with an external input pin. Each LDO operates with an input voltage range between 1.5V and 6.5V allowing them to be supplied from one of the step-down converters or directly from the battery. The output voltage of the LDOs can be set with an external resistor divider for maximum flexibility. Additionally there is a 30mA LDO typically used to provide power in a processor based system to a voltage rail that is always on. TPS650250 comes in a small 5mm x 5mm 32-pin QFN package (RHB).
 
  VALUE
 
UNIT
 
 
Input voltage range on all pins except A/PGND pins with respect to AGND
 
 
–0.3 to 7
 
 
V
 
 
Voltage range on pins VLDO1, VLDO2, FB_LDO1, FB_LDO2
 
 
–0.3 to 3.6
 
 
V
 
 
Current at VINDCDC1, L1, PGND1, VINDCDC2, L2, PGND2, VINDCDC3, L3, PGND3
 
 
2000
 
 
mA
 
Peak current at all other pins
 
500
 
mA
Continuous total power dissipation
 
See Dissipation Ratings
 
 

 

 
 
Send RFQ
Stock:
MOQ:
5 PCS