Send Message
Home > products > Flash Memory IC Chip > New & Original 3-wire Serial EEPROMs 2K (256 x 8 or 128 x 16) AT93C66A-10SQ-2.7

New & Original 3-wire Serial EEPROMs 2K (256 x 8 or 128 x 16) AT93C66A-10SQ-2.7

manufacturer:
Manufacturer
Description:
EEPROM Memory IC 4Kbit 3-Wire Serial 2 MHz 8-SOIC
Category:
Flash Memory IC Chip
Price:
Negotiate
Payment Method:
T/T, Western Union, Payapl
Specifications
Operating Temperature:
−55°C To +125°C
Storage Temperature:
−65°C To +150°C
Voltage On Any Pin With Respect To Ground:
−1.0V To +7.0V
Maximum Operating Voltage:
6.25V
DC Output Current:
5.0 MA
Packages:
8-lead PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP, And 8-ball DBGA2™
Highlight:

programming ic chips

,

programmable audio chip

Introduction

 

3-wire Serial EEPROMs 2K (256 x 8 or 128 x 16) 4K (512 x 8 or 256 x 16)

AT93C56A

AT93C66A

 

Features

• Low-voltage and Standard-voltage Operation

  – 2.7 (VCC = 2.7V to 5.5V)

  – 1.8 (VCC = 1.8V to 5.5V)

• User-selectable Internal Organization

  – 2K: 256 x 8 or 128 x 16

  – 4K: 512 x 8 or 256 x 16

• 3-wire Serial Interface

• Sequential Read Operation

• 2 MHz Clock Rate (5V)

• Self-timed Write Cycle (10 ms Max)

• High Reliability

  – Endurance: 1 Million Write Cycles

  – Data Retention: 100 Years

• Automotive Grade, Extended Temperature, and Lead-free/Halogen-free

  Devices Available

• 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP,

  and 8-ball dBGA2™ Packages

 

Description

The AT93C56A/66A provides 2048/4096 bits of serial electrically erasable programmable read-only memory (EEPROM) organized as 128/256 words of 16 bits each when the ORG pin is connected to VCC and 256/512 words of 8 bits each when it is tied to ground. The device is optimized for use in many industrial and commercial applications where low-power and low-voltage operations are essential. The AT93C56A/66A is available in space-saving 8-lead PDIP, 8-lead JEDEC SOIC, 8-lead EIAJ SOIC, 8-lead MAP, 8-lead TSSOP, and 8-ball dBGA2™ packages.

 

Pin Configurations

  Pin Name     Function
  CS   Chip Select
  SK   Serial Data Clock
  DI   Serial Data Input
  DO   Serial Data Output
  GND   Ground
  VCC   Power Supply
  ORG   Internal Organization
  DC   Don’t Connect

 

 8-ball dBGA2                     8-lead SOIC                            8-lead TSSOP

        

 

    8-lead MAP                            8-lead PDIP                         

    

 

The AT93C56A/66A is enabled through the Chip Select pin (CS) and accessed via a 3-wire serial interface consisting of Data Input (DI), Data Output (DO), and Shift Clock (SK). Upon receiving a READ instruction at DI, the address is decoded and the data is clocked out serially on the data output pin DO. The WRITE cycle is completely selftimed and no separate ERASE cycle is required before WRITE. The WRITE cycle is only enabled when the part is in the ERASE/WRITE ENABLE state. When CS is brought “high” following the initiation of a WRITE cycle, the DO pin outputs the READY/BUSY status of the part. The AT93C56A/66A is available in 2.7V to 5.5V and 1.8V to 5.5V versions.

 

Absolute Maximum Ratings*

Operating Temperature......................................−55°C to +125°C

Storage Temperature .........................................−65°C to +150°C

Voltage on Any Pin

with Respect to Ground........................................ −1.0V to +7.0V

Maximum Operating Voltage .......................................... 6.25V

DC Output Current........................................................ 5.0 mA

                                                                                                                    

*NOTICE: Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.

 

Block Diagram

 

Note: When the ORG pin is connected to VCC, the x 16 organization is selected. When it is connected to ground, the x 8 organization is selected. If the ORG pin is left unconnected and the application does not load the input beyond the capability of the internal 1 Meg ohm pullup, then the x 16 organization is selected. The feature is not available on the 1.8V devices.

 

 

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
10pcs