Send Message
Home > products > MCU Microcontroller Unit > STM32F103VCT6 32 Bit MCU Linear Digital Integrated Circuits IC Resistor

STM32F103VCT6 32 Bit MCU Linear Digital Integrated Circuits IC Resistor

manufacturer:
Manufacturer
Description:
ARM® Cortex®-M3 STM32F1 Microcontroller IC 32-Bit Single-Core 72MHz 256KB (256K x 8) FLASH
Category:
MCU Microcontroller Unit
Price:
Negotiation
Payment Method:
T/T , Western Union,PayPal
Specifications
■ Core: ARM 32-bit Cortex™-M3 CPU:
72 MHz Maximum Frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) Performance At 0 Wait State Memory Access
■ Memories:
256 To 512 Kbytes Of Flash Memory – Up To 64 Kbytes Of SRAM
■ Clock, Reset And Supply Management:
2.0 To 3.6 V Application Supply And I/Os – POR, PDR, And Programmable Voltage Detector (PVD)
■ Low Powe:
Sleep, Stop And Standby Modes – VBAT Supply For RTC And Backup Registers
Package:
LQFP-100
Main Line:
Ic,module,transistor,diodes,capacitor,resistor Etc
Highlight:

programming ic chips

,

ic programmer circuit

Introduction

STM32F103VCT6 32 Bit MCU Linear Digital Integrated Circuits IC Resistor

 

 

Features

■ Core: ARM 32-bit Cortex™-M3 CPU – 72 MHz maximum frequency, 1.25 DMIPS/MHz (Dhrystone 2.1) performance at 0 wait state memory access – Single-cycle multiplication and hardware division

 

■ Memories – 256 to 512 Kbytes of Flash memory – up to 64 Kbytes of SRAM – Flexible static memory controller with 4 Chip Select. Supports Compact Flash, SRAM, PSRAM, NOR and NAND memories – LCD parallel interface, 8080/6800 modes

 

■ Clock, reset and supply management – 2.0 to 3.6 V application supply and I/Os – POR, PDR, and programmable voltage detector (PVD) – 4-to-16 MHz crystal oscillator – Internal 8 MHz factory-trimmed RC – Internal 40 kHz RC with calibration – 32 kHz oscillator for RTC with calibration

 

■ Low power – Sleep, Stop and Standby modes – VBAT supply for RTC and backup registers

 

■ 3 × 12-bit, 1 µs A/D converters (up to 21 channels) – Conversion range: 0 to 3.6 V – Triple-sample and hold capability – Temperature sensor

 

■ 2 × 12-bit D/A converters

 

■ DMA: 12-channel DMA controller – Supported peripherals: timers, ADCs, DAC, SDIO, I2Ss, SPIs, I2Cs and USARTs

 

■ Debug mode – Serial wire debug (SWD) & JTAG interfaces – Cortex-M3 Embedded Trace Macrocell™

 

■ Up to 112 fast I/O ports – 51/80/112 I/Os, all mappable on 16 external interrupt vectors and almost all 5 V-tolerant

 

■ Up to 11 timers – Up to four 16-bit timers, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input – 2 × 16-bit motor control PWM timers with dead-time generation and emergency stop – 2 × watchdog timers (Independent and Window) – SysTick timer: a 24-bit downcounter – 2 × 16-bit basic timers to drive the DAC

 

■ Up to 13 communication interfaces – Up to 2 × I2C interfaces (SMBus/PMBus) – Up to 5 USARTs (ISO 7816 interface, LIN, IrDA capability, modem control) – Up to 3 SPIs (18 Mbit/s), 2 with I2S interface multiplexed – CAN interface (2.0B Active) – USB 2.0 full speed interface – SDIO interface

 

■ CRC calculation unit, 96-bit unique ID

 

■ ECOPACK® packages

 

 

Table 1. Device summary

Reference  Part number
STM32F103xC

STM32F103RC

STM32F103VC

STM32F103ZC

STM32F103xD

STM32F103RD

STM32F103VD

STM32F103ZD

STM32F103xE 

STM32F103RE

STM32F103ZE

STM32F103VE

 

 

Description

The STM32F103xC, STM32F103xD and STM32F103xE performance line family incorporates the high-performance ARM® Cortex™-M3 32-bit RISC core operating at a 72 MHz frequency, high-speed embedded memories (Flash memory up to 512 Kbytes and SRAM up to 64 Kbytes), and an extensive range of enhanced I/Os and peripherals connected to two APB buses. All devices offer three 12-bit ADCs, four general-purpose 16- bit timers plus two PWM timers, as well as standard and advanced communication interfaces: up to two I2Cs, three SPIs, two I2Ss, one SDIO, five USARTs, an USB and a CAN.

 

The STM32F103xx high-density performance line family operates in the –40 to +105 °C temperature range, from a 2.0 to 3.6 V power supply. A comprehensive set of power-saving mode allows the design of low-power applications.

 

 

The STM32F103xx high-density performance line family offers devices in six different package types: from 64 pins to 144 pins. Depending on the device chosen, different sets of peripherals are included, the description below gives an overview of the complete range of peripherals proposed in this family

 

 

Typical current consumption in Run mode versus frequency (at 3.6 V) - code with data processing running from RAM, peripherals enabled

 

 

Send RFQ
Stock:
MOQ:
20pcs