LP3872EMPX-3.3 Integrated Circuit Chip linear integrated circuits
electronics ic chip
,integrated circuit ic
Stock Offer (Hot Sell)
Part no. | Quantity | Brand | D/C | Package |
MCR100-8 | 9700 | ON | 15+ | TO-92 |
GT8Q101 | 9778 | TOSHIBA | 16+ | TO-3P |
LM321MF | 9778 | NS | 16+ | SOT23-5 |
2SC1890 | 9800 | HITACHI | 14+ | TO-92 |
SN74LS74AN | 9800 | TI | 14+ | DIP14 |
STRW6252 | 9800 | SANKEN | 14+ | TO-220F-6 |
MC14584BDR2G | 9811 | ON | 16+ | SOP-14 |
ADM483EARZ | 9855 | AD | 16+ | SOP |
TLP2631 | 9871 | TOSHIBA | 13+ | DIP8 |
74HCT244D | 9878 | PHI | 15+ | SOP |
LM386N-1 | 9880 | NS | 16+ | DIP8 |
MOC3041 | 9888 | FAIRCHILD | 16+ | DIP-6 |
KA1M0565RYDTU | 9955 | FSC | 14+ | TO-220 |
NE556 | 9970 | ST | 14+ | DIP-14 |
AO4468 | 9971 | AOS | 14+ | SOP-8 |
TLP185 | 9985 | TOSHIBA | 16+ | SOP-4 |
FDN5618P | 9997 | FAIRCHILD | 16+ | SOT23 |
BC548C | 9999 | ST | 13+ | TO-92 |
CPC1035N | 9999 | CLARE | 15+ | SOP4 |
PIC12F629-I/P | 9999 | MICROCHIP | 16+ | DIP-8 |
TLP291-4 | 9999 | TOSHIBA | 16+ | SOP16 |
AOD452 | 10000 | AOS | 14+ | TO-252 |
CS1024 | 10000 | ZX | 14+ | TO-92S |
FAN102MY | 10000 | FSC | 14+ | SOP-8 |
HCPL-354-000E | 10000 | AVAGO | 16+ | SOP-4 |
LM358P | 10000 | TI | 16+ | DIP-8 |
MOC3022 | 10000 | MOT | 13+ | DIP-6 |
MOC3063 | 10000 | FSC | 15+ | DIP-6 |
74HC157D | 10008 | 16+ | SOP16 | |
MIC2172YM | 10008 | MIC | 16+ | SOP8 |
LP3872/LP3875
1.5A Fast Ultra Low Dropout Linear Regulators
General Description
The LP3872/LP3875 series of fast ultra low-dropout linear regulators operate from a +2.5V to +7.0V input supply. Wide range of preset output voltage options are available. These ultra low dropout linear regulators respond very quickly to step changes in load, which makes them suitable for low voltage microprocessor applications.
The LP3872/LP3875 are developed on a CMOS process which allows low quiescent current operation independent of output load current. This CMOS process also allows the LP3872/LP3875 to operate under extremely low dropout conditions.
Dropout Voltage: Ultra low dropout voltage; typically 38mV at 150mA load current and 380mV at 1.5A load current.
Ground Pin Current: Typically 6mA at 1.5A load current
Shutdown Mode: Typically 10nA quiescent current when the shutdown pin is pulled low.
Error Flag: Error flag goes low when the output voltage drops 10% below nominal value.
SENSE: Sense pin improves regulation at remote loads
Precision Output Voltage: Multiple output voltage options are available ranging from 1.8V to 5.0V with a guaranteed accuracy of ±1.5% at room temperature, and ±3.0% over all conditions (varying line, load, and temperature).
Features
- Ultra low dropout voltage
- Low ground pin current
- Load regulation of 0.06%
- 10nA quiescent current in shutdown mode
- Guaranteed output current of 1.5A DC
- Available in TO-263, TO-220 and SOT-223 packages
- Output voltage accuracy ± 1.5%
- Error flag indicates output status
- Sense option improves load regulation
- Minimum output capacitor requirements
- Overtemperature/overcurrent protection
- −40˚C to +125˚C junction temperature range
Applications
- Microprocessor power supplies
- GTL, GTL+, BTL, and SSTL bus terminators
- Power supplies for DSPs
- SCSI terminator
- Post regulators
- High efficiency linear regulators
- Battery chargers
- Other battery powered applications
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.
Storage Temperature Range −65˚C to +150˚C
Lead Temperature (Soldering, 5 sec.) 260˚C
ESD Rating (Note 3) 2 kV
Power Dissipation (Note 2) Internally Limited
Input Supply Voltage (Survival) −0.3V to +7.5V
Shutdown Input Voltage (Survival) −0.3V to +7.5V
Output Voltage (Survival), (Note 4), (Note 5) −0.3V to +6.0V
IOUT (Survival) Short Circuit Protected
Maximum Voltage for ERROR Pin VIN
Maximum Voltage for SENSE Pin VOUT
Operating Ratings
Input Supply Voltage (Note 6) 2.5V to 7.0V
Shutdown Input Voltage −0.3V to 7.0V
Maximum Operating Current (DC) 1.5A
Junction Temperature −40˚C to +125˚C
Note 1: Absolute maximum ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions for which the device is intended to be functional, but does not guarantee specific performance limits. For guaranteed specifications and test conditions, see Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions.
Note 2: At elevated temperatures, devices must be derated based on package thermal resistance. The devices in TO220 package must be derated at θjA = 50˚C/W (with 0.5in2, 1oz. copper area), junction-to-ambient (with no heat sink). The devices in the TO263 surface-mount package must be derated at θjA = 60˚C/W (with 0.5in2, 1oz. copper area), junction-to-ambient. The SOT-223 package must be derated at θjA = 90˚C/W (with 0.5in2, 1oz. copper area), junction-to-ambient.
Note 3: The human body model is a 100pF capacitor discharged through a 1.5kΩ resistor into each pin.
Note 4: If used in a dual-supply system where the regulator load is returned to a negative supply, the output must be diode-clamped to ground.
Note 5: The output PMOS structure contains a diode between the VIN and VOUT terminals. This diode is normally reverse biased. This diode will get forward biased if the voltage at the output terminal is forced to be higher than the voltage at the input terminal. This diode can typically withstand 200mA of DC current and 1Amp of peak current.
Note 6: The minimum operating value for VIN is equal to either [VOUT(NOM) + VDROPOUT] or 2.5V, whichever is greater.
Typical Application Circuits
Connection Diagrams
Block Diagrams
TPS5401DGQR adjustable 0.5A Step Down Regulator SWIFT™ 42V Input Step Down Transformer
TL431BCDBZTG4 NEW AND ORIGINAL STOCK
TLV431ACDBZR NEW AND ORIGINAL STOCK
TLV62565DBVR NEW AND ORIGINAL STOCK
BQ24721CRHBR Electronic IC Chip NEW AND ORIGINAL STOCK
BQ24061DRCR Electronic IC Chip NEW AND ORIGINAL STOCK
DRV8824PWPR Flash Memory IC NEW AND ORIGINAL STOCK
LM2937ES-10 500mA Low Dropout Regulator DDPAK Semiconductor
REF02AU Power Management IC Vref Series 5V Precision Voltage Reference
TPS767D318PWPR 350mV SSOP28 Low Dropout Voltage Regulators
Image | Part # | Description | |
---|---|---|---|
TPS5401DGQR adjustable 0.5A Step Down Regulator SWIFT™ 42V Input Step Down Transformer |
Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 500mA 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width)
|
||
TL431BCDBZTG4 NEW AND ORIGINAL STOCK |
Shunt Voltage Reference IC Adjustable 2.495V 36 VV ±0.5% 100 mA SOT-23-3
|
||
TLV431ACDBZR NEW AND ORIGINAL STOCK |
Shunt Voltage Reference IC Adjustable 1.24V 6 VV ±1% 15 mA SOT-23-3
|
||
TLV62565DBVR NEW AND ORIGINAL STOCK |
Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 1.5A SC-74A, SOT-753
|
||
BQ24721CRHBR Electronic IC Chip NEW AND ORIGINAL STOCK |
Charger IC Multi-Chemistry 32-VQFN (5x5)
|
||
BQ24061DRCR Electronic IC Chip NEW AND ORIGINAL STOCK |
Charger IC Lithium Ion/Polymer 10-VSON (3x3)
|
||
DRV8824PWPR Flash Memory IC NEW AND ORIGINAL STOCK |
Bipolar Motor Driver Power MOSFET Logic 28-HTSSOP
|
||
LM2937ES-10 500mA Low Dropout Regulator DDPAK Semiconductor |
Linear Voltage Regulator IC Positive Fixed 1 Output 500mA DDPAK/TO-263-3
|
||
REF02AU Power Management IC Vref Series 5V Precision Voltage Reference |
Series Voltage Reference IC Fixed 5V V ±0.3% 21 mA 8-SOIC
|
||
TPS767D318PWPR 350mV SSOP28 Low Dropout Voltage Regulators |
Linear Voltage Regulator IC Positive Fixed 2 Output 1A 28-HTSSOP
|