Send Message
Home > products > Display Driver ICs > HIN232CPZ Integrated Circuit Chip +5V Powered RS-232 Transmitters/Receivers

HIN232CPZ Integrated Circuit Chip +5V Powered RS-232 Transmitters/Receivers

manufacturer:
Renesas
Description:
2/2 Transceiver Full RS232 16-PDIP
Category:
Display Driver ICs
Price:
Negotiation
Payment Method:
T/T, Western Union,PayPal
Specifications
VCC:
Power Supply Input 5V ±10%
V+:
Internally Generated Positive Supply (+10V Nominal), HIN239 Requires +7.5V To +13.2V.
V-:
Internally Generated Negative Supply (-10V Nominal).
GND:
Ground Lead. Connect To 0V
C1+:
External Capacitor (+ Terminal) Is Connected To This Lead
Highlight:

electronics ic chip

,

integrated circuit ic

Introduction

+5V Powered RS-232

 

Transmitters/Receivers

Features

• Meets All RS-232E and V.28 Specifications

• Requires Only Single +5V Power Supply

- (+5V and +12V - HIN239)

• High Data Rate.  120kbps

• Onboard Voltage Doubler/Inverter

• Low Power Consumption

• Low Power Shutdown Function

• Three-State TTL/CMOS Receiver Outputs

• Multiple Drivers

- ±10V Output Swing for 5V lnput

- 300Ω Power-Off Source Impedance

- Output Current Limiting

- TTL/CMOS Compatible

- 30V/µs Maximum Slew Rate

 

 

description

The HIN232-HIN241 family of RS-232 transmitters/receivers interface circuits meet all ElA RS-232E and V.28 specifications, and are particularly suited for those applications where ±12V is not available. They require a single +5V power supply (except HIN239) and feature onboard charge pump voltage converters which generate +10V and -10V supplies from the 5V supply. The family of devices offer a wide variety of RS-232 transmitter/receiver combinations to accommodate various applications (see Selection Table).

 

 

Absolute Maximum Ratings

VCC to Ground. . . . . . . . . . . . . . . . . . . . . . (GND -0.3V) < VCC < 6V

V+ to Ground (Note 2) . . . . . . . . . . . . . . . (VCC -0.3V) < V+ < 13.2V

V- to Ground. . . . . . . . . . . . . . . . . . . . . . . . -12V < V- < (GND +0.3V)

V+ to V- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24V

Input Voltages

TIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -0.3V < VIN < (V+ +0.3V)

RIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±30V

Output Voltages

TOUT . . . . . . . . . . . . . . . . . . . .(V- -0.3V) < VTXOUT < (V+ +0.3V)

ROUT . . . . . . . . . . . . . . . . . (GND -0.3V) < VRXOUT < (V+ +0.3V)

Short Circuit Duration

TOUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous

ROUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Continuous

 

*Pb-free PDIPs can be used for through hole wave solder processing only. They are not intended for use in Reflow solder processing applications.

 

 

 

Typical Performance Curves

 

Send RFQ
Stock:
MOQ:
20pcs