Low Power 10 MHz Rail - to - Rail I/O Operational Amplifiers LM6134BIM
integrated circuit ic
,integrated circuit components
LM6132 Dual/LM6134 Quad Low Power 10 MHz Rail-to-Rail I/O Operational Amplifiers
General Description
The LM6132/34 provides new levels of speed vs power performance in applications where low voltage supplies or power limitations previously made compromise necessary. With only 360 µA/amp supply current, the 10 MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.
The LM6132/34 can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This is particularly important when operating on low supply voltages. The LM6132/34 can also drive large capacitive loads without oscillating.
Operating on supplies from 2.7V to over 24V, the LM6132/34 is excellent for a very wide range of applications, from battery operated systems with large bandwidth requirements to high speed instrumentation.
Features
(For 5V Supply, Typ Unless Noted)
- Rail-to-Rail input CMVR −0.25V to 5.25V
- Rail-to-Rail output swing 0.01V to 4.99V
- High gain-bandwidth, 10 MHz at 20 kHz
- Slew rate 12 V/µs
- Low supply current 360 µA/Amp
- Wide supply range 2.7V to over 24V
- CMRR 100 dB
- Gain 100 dB with RL = 10k
- PSRR 82 dB
Applications
- Battery operated instrumentation
- Instrumentation Amplifiers
- Portable scanners
- Wireless communications
- Flat panel display driver
Connection Diagrams
Absolute Maximum Ratings (Note 1)
If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications.
ESD Tolerance (Note 2) 2500V
Differential Input Voltage 15V
Voltage at Input/Output Pin (V+ )+0.3V, (V− )−0.3V
Supply Voltage (V+ –V− ) 35V
Current at Input Pin ±10 mA
Current at Output Pin (Note 3) ±25 mA
Current at Power Supply Pin 50 mA
Lead Temp. (soldering, 10 sec.) 260˚C
Storage Temperature Range −65˚C to +150˚C
Junction Temperature (Note 4) 150˚C
Operating Ratings(Note 1)
Supply Voltage 1.8V ≤ VS ≤ 24V
Junction Temperature Range
LM6132, LM6134 −40˚C ≤ TJ ≤ +85˚C
Thermal resistance (θJA)
N Package, 8-pin Molded DIP 115˚C/W
M Package, 8-pin Surface Mount 193˚C/W
N Package, 14-pin Molded DIP 81˚C/W
M Package, 14-pin Surface Mount 126˚C/W
LMC6482IMX/NOPB Cmos Dual Rail-To-Rail Input Output Operational Amplifier IC
DRV602PWR Flash Memory IC NEW AND ORIGINAL STOCK
OPA335AIDR Electronic IC Chips SINGLE-SUPPLY CMOS OPERATIONAL AMPLIFIERS
OPA4228UA General Purpose Amplifier 4 Circuit 14 SOIC 11 V/µS Slew Rate
TL082CP Integrated Circuit Chipjfet Input Operational Amplifier High Slew Rate
TAS5162DKDR NEW AND ORIGINAL STOCK
TL062CDR NEW AND ORIGINAL STOCK
LM324N NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
LMC6482IMX/NOPB Cmos Dual Rail-To-Rail Input Output Operational Amplifier IC |
CMOS Amplifier 2 Circuit Rail-to-Rail 8-SOIC
|
||
DRV602PWR Flash Memory IC NEW AND ORIGINAL STOCK |
Amplifier IC 2-Channel (Stereo) Class AB 14-TSSOP
|
||
OPA335AIDR Electronic IC Chips SINGLE-SUPPLY CMOS OPERATIONAL AMPLIFIERS |
Zero-Drift Amplifier 1 Circuit Rail-to-Rail 8-SOIC
|
||
OPA4228UA General Purpose Amplifier 4 Circuit 14 SOIC 11 V/µS Slew Rate |
General Purpose Amplifier 4 Circuit 14-SOIC
|
||
TL082CP Integrated Circuit Chipjfet Input Operational Amplifier High Slew Rate |
J-FET Amplifier 2 Circuit 8-PDIP
|
||
TAS5162DKDR NEW AND ORIGINAL STOCK |
Amplifier IC 2-Channel (Stereo) Class D 36-HSSOP
|
||
TL062CDR NEW AND ORIGINAL STOCK |
J-FET Amplifier 2 Circuit 8-SOIC
|
||
LM324N NEW AND ORIGINAL STOCK |
General Purpose Amplifier 4 Circuit 14-PDIP
|