Smart Battery Monitor DS2438AZ+T&R For Computer / Cellular Phone
electronics ic chip
,integrated circuit components
DS2438
Smart Battery Monitor
FEATURES
♦Unique 1-Wire® interface requires only one port pin for communication
♦Provides unique 64-bit serial number
♦Eliminates thermistors by sensing battery temperature on-chip
♦On-board A/D converter allows monitoring of battery voltage for end-of-charge and endof-discharge determination
♦On-board integrated current accumulator facilitates fuel gauging
♦Elapsed time meter in binary format
♦40-byte nonvolatile user memory available for storage of battery-specific data
♦Reverts to low-power sleep mode on battery pack disconnect (feature disabled on DS2438AZ)
♦Operating range -40ºC to +85ºC
♦Applications include portable computers, portable/cellular phones, consumer electronics, and handheld instrumentation PIN ASSI
PIN DESCRIPTION
DQ - Data In/Out
VAD - General A/D input
VSENS+ - Battery current monitor input (+)
VSENS- - Battery current monitor input (-)
VDD - Power Supply (2.4V to 10.0V)
GND - Ground NC - No connect
DESCRIPTION
The DS2438 Smart Battery Monitor provides several functions that are desirable to carry in a battery pack: a means of tagging a battery pack with a unique serial number, a direct-to-digital temperature sensor which eliminates the need for thermistors in the battery pack, an A/D converter which measures the battery voltage and current, an integrated current accumulator which keeps a running total of all current going into and out of the battery, an elapsed time meter, and 40 bytes of nonvolatile EEPROM memory for storage of important parameters such as battery chemistry, battery capacity, charging methodology and assembly date. Information is sent to/from the DS2438 over a 1-Wire interface, so that only one wire (and ground) needs to be connected from a central microprocessor to a DS2438. This means that battery packs need only have three output connectors: battery power, ground, and the 1-Wire interface.
| PIN | SYMBOL | DESCRIPTION |
| 1 | GND | Ground |
| 2 | VSENS+ | Battery Input: connection for battery current to be monitored (see text) |
| 3 | VSENS- | Battery Input: connection for battery current to be monitored (see text) |
| 4 | VAD | ADC Input: input for general purpose A/D |
| 5 | VDD | VDD Pin: input supply voltage |
| 6,7 | NC | No Connect |
| 8 | DQ | Data Input/Out: for 1-Wire operation: Open drain |
MAX7219CWG+T LED 7-Segment 8-Digit Tube Display Module Control Module
LT3692AEUH#TRPBF Power Management IC Monolithic Dual Tracking 3.5A Step Down Regulator
LTC2902-1CGN#TRPBF Flash Memory IC NEW AND ORIGINAL STOCK
LTC2932IF#TRPBF Flash Memory IC NEW AND ORIGINAL STOCK
Hot Sale (New Original) IC ADP7118ARDZ-5.0 LDO Regulator Pos 5V 0.2A 8-Pin electronic components
Electronic components MAX253EPA+ Active Filter Single SW-CAP Low Pass electronic components
AD536AJD Electronic IC Chips Integrated Circuit True RMS-to-DC Converter