ADM485ARZ-REEL 5V SOP-8 EIA RS-485 Low Power Transceiver IC
Specifications
PN:
ADM485ARZ-REEL
Brands:
ADI
Original:
USA
Type:
Meets EIA RS-485 Standard Interface IC
Package:
SOP-8
Voltage:
5V
Highlight:
SOP-8 Low Power Transceiver IC
,RS-485 Low Power Transceiver IC
,ADM485ARZ-REEL
Introduction
ADM485ARZ-REEL 5V Low Power Transceiver SOP-8 Meets EIA RS-485 standard Interface IC
FEATURES
Meets EIA RS-485 standard
5 Mbps data rate
Single 5 V supply
–7 V to +12 V bus common-mode range
High speed, low power BiCMOS
Thermal shutdown protection
Short-circuit protection
Driver propagation delay: 10 ns typical
Receiver propagation delay: 15 ns typical
High-Z outputs with power off
Superior upgrade for LTC485
APPLICATIONS
Low power RS-485 systems
DTE/DCE interface
Packet switching
Local area networks (LNAs)
Data concentration
Data multiplexers
Integrated services digital network (ISDN)
GENERAL DESCRIPTION
The ADM485 is a differential line transceiver suitable for high
speed bidirectional data communication on multipoint bus
transmission lines. It is designed for balanced data transmission
and complies with EIA standards RS-485 and RS-422. The part
contains a differential line driver and a differential line receiver.
Both the driver and the receiver can be enabled independently.
When disabled, the outputs are three-stated.
The ADM485 operates from a single 5 V power supply.
Excessive power dissipation caused by bus contention or by
output shorting is prevented by a thermal shutdown circuit. If
during fault conditions, a significant temperature increase is
detected in the internal driver circuitry, this feature forces the
driver output into a high impedance state.
Related Products
Image | Part # | Description | |
---|---|---|---|
![]() |
MAX3485EESA+T Computer IC Chip Transceiver Half RS422 / RS485 8-SOIC 1 / 1 |
1/1 Transceiver Half RS422, RS485 8-SOIC
|
Send RFQ
Stock:
MOQ:
10pcs