DRV8825PWPR 3D Printer Components StepStick 3d Printer Stepper Motor Driver
Specifications
Type:
3D Printers
Product Name:
DRV8825 3D Printer Accessories StepStick DRV8825 Stepper Motor Driver
Keywords:
3D Printers
Supply Voltage:
Standard Voltage
Stock Status:
In Stock,Can Ship At Once
Package:
Original Package, Anti-static Bag
Application:
Electronic Products
Condition:
100%, Brand New And Original
Warranty:
365days
Highlight:
DRV8825 3D Printer Components
,DRV8825
,DRV8825 Driver
Introduction
DRV8825 3D Printer Accessories StepStick DRV8825 Stepper Motor Driver
Features:
The maximum current is 2.5A;Up to 32 subdivisions are supported;4-layer PCB board, better heat dissipation performance;The internal resistance of the chip is smaller, the heat generation is lower, and the heat dissipation is better.
1. Suitable for driving stepper motor below 8.2V ~ 45V 2.5A;2. Only simple step and direction control interface;3. Six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32;
4. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate;5. Automatic current attenuation mode detection / selection;
6. Overheat shutdown circuit, undervoltage lockout, cross current protection;
7. Ground short circuit protection and load short circuit protection
parameter:
Manufacturing process: SMT placement machine manufacturing, non-manual welding, higher yield, more stable performance
Suitable for:
Where the stepper motor needs to be driven.
It is a necessary module for building 3d printer, cnc, engraving machine and so on.
Supported 3D printers include Prusa Mendel, ultimaker, printbot, makerbot, etc.
You can refer to the following for Arduino code to directly drive the motor
colour: purple
Material: PCB
size: 1.5mmX2mm
Package Contents:
5 * DRV8825 stepper motor driver
5 * heat sink
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
1. Suitable for driving stepper motor below 8.2V ~ 45V 2.5A;2. Only simple step and direction control interface;3. Six different stepping modes: full, half, 1/4, 1/8, 1/16, 1/32;
4. The adjustable potentiometer can adjust the maximum current output to obtain a higher step rate;5. Automatic current attenuation mode detection / selection;
6. Overheat shutdown circuit, undervoltage lockout, cross current protection;
7. Ground short circuit protection and load short circuit protection
parameter:
Manufacturing process: SMT placement machine manufacturing, non-manual welding, higher yield, more stable performance
Suitable for:
Where the stepper motor needs to be driven.
It is a necessary module for building 3d printer, cnc, engraving machine and so on.
Supported 3D printers include Prusa Mendel, ultimaker, printbot, makerbot, etc.
You can refer to the following for Arduino code to directly drive the motor
colour: purple
Material: PCB
size: 1.5mmX2mm
Package Contents:
5 * DRV8825 stepper motor driver
5 * heat sink
Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
Stock Status | In stock |
Rohs compliant | Rohs |
Supplier | CM GROUP |
sales@cmhk-ic.com | |
Cell/wechats/whatsapp | 0086-755-88367703 |
Packing & Delivery:
FAQ:
Related Products
TPS5401DGQR adjustable 0.5A Step Down Regulator SWIFT™ 42V Input Step Down Transformer
Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 500mA 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width)
TL431BCDBZTG4 NEW AND ORIGINAL STOCK
Shunt Voltage Reference IC Adjustable 2.495V 36 VV ±0.5% 100 mA SOT-23-3
TLV431ACDBZR NEW AND ORIGINAL STOCK
Shunt Voltage Reference IC Adjustable 1.24V 6 VV ±1% 15 mA SOT-23-3
TLV62565DBVR NEW AND ORIGINAL STOCK
Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 1.5A SC-74A, SOT-753
BQ24721CRHBR Electronic IC Chip NEW AND ORIGINAL STOCK
Charger IC Multi-Chemistry 32-VQFN (5x5)
BQ24061DRCR Electronic IC Chip NEW AND ORIGINAL STOCK
Charger IC Lithium Ion/Polymer 10-VSON (3x3)
DRV8824PWPR Flash Memory IC NEW AND ORIGINAL STOCK
Bipolar Motor Driver Power MOSFET Logic 28-HTSSOP
LM2937ES-10 500mA Low Dropout Regulator DDPAK Semiconductor
Linear Voltage Regulator IC Positive Fixed 1 Output 500mA DDPAK/TO-263-3
REF02AU Power Management IC Vref Series 5V Precision Voltage Reference
Series Voltage Reference IC Fixed 5V V ±0.3% 21 mA 8-SOIC
TPS767D318PWPR 350mV SSOP28 Low Dropout Voltage Regulators
Linear Voltage Regulator IC Positive Fixed 2 Output 1A 28-HTSSOP
Image | Part # | Description | |
---|---|---|---|
TPS5401DGQR adjustable 0.5A Step Down Regulator SWIFT™ 42V Input Step Down Transformer |
Buck Switching Regulator IC Positive Adjustable 0.8V 1 Output 500mA 10-PowerTFSOP, 10-MSOP (0.118", 3.00mm Width)
|
||
TL431BCDBZTG4 NEW AND ORIGINAL STOCK |
Shunt Voltage Reference IC Adjustable 2.495V 36 VV ±0.5% 100 mA SOT-23-3
|
||
TLV431ACDBZR NEW AND ORIGINAL STOCK |
Shunt Voltage Reference IC Adjustable 1.24V 6 VV ±1% 15 mA SOT-23-3
|
||
TLV62565DBVR NEW AND ORIGINAL STOCK |
Buck Switching Regulator IC Positive Adjustable 0.6V 1 Output 1.5A SC-74A, SOT-753
|
||
BQ24721CRHBR Electronic IC Chip NEW AND ORIGINAL STOCK |
Charger IC Multi-Chemistry 32-VQFN (5x5)
|
||
BQ24061DRCR Electronic IC Chip NEW AND ORIGINAL STOCK |
Charger IC Lithium Ion/Polymer 10-VSON (3x3)
|
||
DRV8824PWPR Flash Memory IC NEW AND ORIGINAL STOCK |
Bipolar Motor Driver Power MOSFET Logic 28-HTSSOP
|
||
LM2937ES-10 500mA Low Dropout Regulator DDPAK Semiconductor |
Linear Voltage Regulator IC Positive Fixed 1 Output 500mA DDPAK/TO-263-3
|
||
REF02AU Power Management IC Vref Series 5V Precision Voltage Reference |
Series Voltage Reference IC Fixed 5V V ±0.3% 21 mA 8-SOIC
|
||
TPS767D318PWPR 350mV SSOP28 Low Dropout Voltage Regulators |
Linear Voltage Regulator IC Positive Fixed 2 Output 1A 28-HTSSOP
|
Send RFQ
Stock:
MOQ:
2