Send Message
Home > Products > Flash Memory IC Chip > W25Q64FVSSIG IC Flash Memory Chip 64M Bit 104Mhz 8Sop Winbond Original 2.7V-3.6V

W25Q64FVSSIG IC Flash Memory Chip 64M Bit 104Mhz 8Sop Winbond Original 2.7V-3.6V

FLASH - NOR Memory IC 64Mbit SPI - Quad I/O, QPI 104 MHz 8-SOIC
Flash Memory IC Chip
Payment Method:
T/T, Western Union,Paypal
2.7V ~ 3.6V
SPI Flash Memory
Memory Capacity:
64Mb (8M X 8)
LCD Monitors, Flat Panel TV, Printers, GPS, MP3
Clock Frequency:
104MHz Single, Dual/Quad SPI & QPI
SPI Serial Flash
High Light:

serial flash memory


serial flash chip


W25Q64FVSSIG IC Flash Memory Chip 64Mbit 104Mhz 8Sop Winbond Original

The W25Q64FV (64M-bit) Serial Flash memory provides a storage solution for systems with limited space, pins and power.
The 25Q series offers flexibility and performance well beyond ordinary Serial Flash devices. They are ideal for code shadowing to RAM, executing code directly from Dual/Quad SPI (XIP) and storing voice, text and data. The device operates on a single 2.7V to 3.6V power supply with current consumption as low as 4mA active and 1µA for power-down.
All devices are offered in space-saving packages.
The W25Q64FV array is organized into 32,768 programmable pages of 256-bytes each. Up to 256 bytes can be programmed at a time. Pages can be erased in groups of 16 (4KB sector erase), groups of 128 (32KB block erase), groups of 256 (64KB block erase) or the entire chip (chip erase). The W25Q64FV has 2,048 erasable sectors and 128 erasable blocks respectively. The small 4KB sectors allow for greater flexibility in applications that require data and parameter storage. 
The W25Q64FV support the standard Serial Peripheral Interface (SPI), Dual/Quad I/O SPI as well as 2- clocks instruction cycle Quad Peripheral Interface (QPI): Serial Clock, Chip Select, Serial Data I/O0 (DI), I/O1 (DO), I/O2 (/WP), and I/O3 (/HOLD). SPI clock frequencies of up to 104MHz are supported allowing equivalent clock rates of 208MHz (104MHz x 2) for Dual I/O and 416MHz (104MHz x 4) for Quad I/O when using the Fast Read Dual/Quad I/O and QPI instructions.
These transfer rates can outperform standard Asynchronous 8 and 16-bit Parallel Flash memories. The Continuous Read Mode allows for efficient memory access with as few as 8-clocks of instruction-overhead to read a 24-bit address, allowing true XIP (execute in place) operation.
A Hold pin, Write Protect pin and programmable write protection, with top or bottom array control, provide further control flexibility. Additionally, the device supports JEDEC standard manufacturer and device identification, a 64-bit Unique Serial Number and three 256-bytes Security Registers.

 Family of SpiFlash Memories
 Highest Performance Serial Flash
 Efficient “Continuous Read” and QPI Mode
 Low Power, Wide Temperature Range
 Flexible Architecture with 4KB sectors
 Advanced Security Features
 Space Efficient Packaging
W25X10 W25X20 W25X40 W25X80 W25X16 W25X32 W25X40BVSSIG W25Q32BVSSIG W25Q64CVSSIG

Send RFQ