HD3SS3212IRKSR Ethernet Switch IC Multiplexer Switch ICs HD3SS3212I
ethernet transceiver ic
,fast ethernet switch chip
HD3SS3212IRKSR Ethernet Switch IC Multiplexer Switch ICs HD3SS3212I
1 Features
- Provides MUX/DEMUX Solution for USB Type- CTM Ecosystem for USB 3.1 Gen 1 and Gen 2 Data Rates
-
Compatible With MIPI DSI/CSI, FPDLinkIII, LVDS, and PCIE Gen II, III
-
Operates up to 10 Gbps
-
Wide –3-dB Differential BW of over 8 GHz
-
Excellent Dynamic Characteristics (at 5 GHz)
-
– Crosstalk = –32 dB
-
– Off Isolation = –19 dB
-
– Insertion Loss = –1.6 dB
-
– Return Loss = –12 dB
-
-
Bidirectional "Mux/De-Mux" Differential Switch
-
Supports Common Mode Voltage 0 to 2 V
-
Single Supply Voltage VCC of 3.3 V
-
Commercial Temperature Range of 0°C to 70°C (HD3SS3212RKS)
-
Industrial Temperature Range of –40°C to 85°C (HD3SS3212IRKS)
2 Applications
-
USB Type-CTM Ecosystem
-
Desktop and Notebook PCs
-
Server/Storage Area Networks
-
PCI Express Backplanes
-
Shared I/O Ports
-
FPDLinkII and FPDLinkIII Switching
3 Description
The HD3SS3212 is a high-speed bidirectional passive switch in mux or demux configurations suited for USB Type-CTM application supporting USB 3.1 Gen 1 and Gen 2 data rates. Based on control pin SEL, the device provides switching on differential channels between Port B or Port C to Port A.
The HD3SS3212 is a generic analog differential passive switch that can work for any high-speed interface applications requiring a common mode voltage range of 0 to 2 V and differential signaling with differential amplitude up to 1800 mVpp. It employs adaptive tracking that ensures the channel remains unchanged for the entire common mode voltage range.
Excellent dynamic characteristics of the device allow high-speed switching with minimum attenuation to the signal eye diagram with very little added jitter. It consumes <2 mW of power when operational and has a shutdown mode exercisable by OEn pin resulting <20 μW.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
HD3SS3212 |
VQFN (20) |
2.50 mm × 4.50 mm × 0.5-mm pitch |
|
HD3SS3212I |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|