TS3USB3000RSER Ethernet Switch IC USB Switch ICs DPDT USB 2.0 Hi-Spd (480Mbps)
ethernet transceiver ic
,fast ethernet switch chip
TS3USB3000RSER Ethernet Switch IC USB Switch ICs DPDT USB 2.0 Hi-Spd (480Mbps)
1 Features
- VCCRange2.3Vto4.8V
-
Mobile Hi-Definition Link (MHL) Switch:
-
– Bandwidth (–3 dB): 6.1 GHz
-
– RON (Typical): 5.7 Ω
-
– CON (Typical): 1.6 pF
-
-
USB Switch:
-
– Bandwidth (–3 dB): 6.1 GHz
-
– RON (Typical): 4.6 Ω
-
– CON (Typical): 1.4 pF
-
-
Current Consumption: 30 μA (Typical)
-
Special Features:
-
– IOFF Protection Prevents Current Leakage in Powered-Down State (VCC and VBUS = 0 V)
-
– 1.8-V Compatible Control Inputs (SEL, OE)
-
– Overvoltage Tolerance (OVT) on all I/O Pins up to 5.5 V Without External Components
-
– Overvoltage Protection When 9-V Short to D+/-Pin
-
-
ESD Performance:
-
– 3.5-kV Human Body Model (A114B, Class II)
-
– 1-kV Charged-Device Model (C101)
-
-
10-Pin UQFN Package
(1.5-mm × 2-mm, 0.5-mm Pitch)
2 Applications
-
Smartphones, Tablets, Mobile
-
Portable Instrumentation
-
Digital Still Cameras
3 Description
The TS3USB3000 device is a double-pole, double throw (DPDT) multiplexer that includes a high-speed Mobile High-Definition Link (MHL) switch and an USB 2.0 High-Speed (480 Mbps) switch in the same package. These configurations allow the system designer to use a common USB or Micro-USB connector for both MHL video signals and USB data.
The TS3USB3000 has a VCC range of 2.3 V to 4.8 V and supports overvoltage tolerance (OVT) feature, which allows the I/O pins to withstand overvoltage conditions (up to 5.5 V). The power-off protection feature forces all I/O pins to be in high-impedance mode when power is not present, allowing full isolation of the signal lines under such condition without excessive leakage current. The select pins of TS3USB3000 are compatible with 1.8-V control voltage, allowing them to be directly interfaced with the General-Purpose I/O (GPIO) from a mobile processor.
The TS3USB3000 comes with a small 10-pin UQFN package with only 1.5 mm × 2 mm in size, which makes it a perfect candidate to be used in mobile applications.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
TS3USB3000 |
UQFN (10) |
1.50 mm × 2.00 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|