TPS22980RGPR Ethernet Switch IC Power Distribution 3.3-18V Mux w/ Over Current Limit

TPS22980RGPR Ethernet Switch IC Power Distribution 3.3-18V Mux w/ Over Current Limit

FEATURES

• Powered From 3.3V

• 4.5V to 19.8V High Voltage Switch

• 3V to 3.6V Switch

• Adjustable Current Limit

• Thermal Shutdown

• Make Before Break Switch

• High Voltage Discharge Before Low Voltage Make

• Reverse Current Blocking DESCRIPTION

APPLICATIONS
• Notebook Computers

• Desktop Computers
• Power Management Systems

The TPS22980 is a current-limited power mux providing a connection to a peripheral device from either a low voltage supply (3.0V up to 3.6V) or a high voltage supply (5V up to 18V). The desired output is selected by digital control signals.

The high voltage (VHV) and low voltage (V3P3) switch current limits are set with external resistance. Once the current limit is reached, the TPS22980 will control the switch to maintain the current at the limit.

When the high voltage supply is not present, the TPS22980 will maintain the connection to the output from the low voltage supply. When a high voltage line and high voltage enable signal is detected by the device, the high voltage switch will be turned on in conjunction with the low voltage switch until a reverse current is detected by the low voltage switch. The low voltage switch is then disabled allowing a seamless transition from a low voltage to a high voltage supply with minimal drop and shoot-through current.

To prevent current backflow during a transition from a VHV connection to a V3P3 connection, the TPS22980 will break the VHV connection and discharge the output to approximately 3.3V. Once the output reaches 3.3V the device will connect V3P3 switch. If a load is present, the output will transition to 0V before returning to 3.3V.

The TPS22980 is available in a 4mm x 4mm x 1mm QFN package.