TPS22963CYZPR Ethernet Switch IC Power Distribution Low On-Resistance 3A Load Switch
ethernet transceiver ic
,fast ethernet switch chip
TPS22963CYZPR Ethernet Switch IC Power Distribution Low On-Resistance 3A Load Switch
1 Features
- Integrated N-Channel Load Switch
-
Input Voltage Range: 1 V to 5.5 V
-
Internal Pass-FET RDSON = 8 mΩ (Typ)
-
Ultra-Low ON-Resistance
-
– RON =13mΩ(Typ)atVIN =5V
-
– RON =14mΩ(Typ)atVIN =3.3V
-
– RON =18mΩ(Typ)atVIN =1.8V
-
-
3A Maximum Continuous Switch Current
-
Reverse Current Protection (When Disabled)
-
Low Shutdown Current (760 nA)
-
Low Threshold 1.3-V GPIO Control Input
-
Controlled Slew-Rate to Avoid Inrush Current
-
Quick Output Discharge (TPS22964 only)
-
Six Terminal Wafer-Chip-Scale Package (Nominal Dimensions Shown - See Addendum for Details)
– 0.9mmx1.4mm,0.5mmPitch,0.5mm Height (YZP)
-
ESD Performance Tested Per JESD 22
-
– 2-kV Human-Body Model (A114-B, Class II)
-
– 500-V Charged-Device Model (C101)
-
2 Applications
-
Smartphones
-
Notebook Computer and UltrabookTM
-
Tablet PC Computer
-
Solid State Drives (SSD)
-
DTV/IP Set Top Box
-
POS Terminals and Media Gateways
3 Description
The TPS22963/64 is a small, ultra-low RON load switch with controlled turn on. The device contains a low RDSON N-Channel MOSFET that can operate over an input voltage range of 1 V to 5.5 V and switch currents of up to 3 A. An integrated charge pump biases the NMOS switch in order to achieve a low switch ON-Resistance. The switch is controlled by an on/off input (ON), which is capable of interfacing directly with low-voltage GPIO control signals. The rise time of the TPS22963/64 device is internally controlled in order to avoid inrush current.
The TPS22963/64 provides reverse current protection. When the power switch is disabled, the device will not allow the flow of current towards the input side of the switch. The reverse current protection feature is active only when the device is disabled so as to allow for intentional reverse current (when the switch is enabled) for some applications.
The TPS22963/64 is available in a small, space- saving 6-pin WCSP package and is characterized for operation over the free air temperature range of –40°C to 85°C.
Device Information
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
TPS2296xC | DSBGA (6) | 1.40 mm x 0.90 mm |

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
![]() |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
![]() |
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
![]() |
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
![]() |
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
![]() |
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
![]() |
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
![]() |
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|