Send Message
Home > products > Flash Memory IC Chip > MAX3222CPWR UART Interface ICc RS-232 Interface IC 3-5.5V Mult-Ch RS232

MAX3222CPWR UART Interface ICc RS-232 Interface IC 3-5.5V Mult-Ch RS232

manufacturer:
Manufacturer
Description:
IC TRANSCEIVER FULL 2/2 20TSSOP
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Mounting Style:
SMD/SMT
Package / Case:
TSSOP-20
Function:
Transceiver
Data Rate:
250 Kb/s
Number Of Drivers:
2 Driver
Number Of Receivers:
2 Receiver
Highlight:

uart level shifter ic

,

usb serial converter chip

Introduction

MAX3222CPWR UART Interface ICc RS-232 Interface IC 3-5.5V Mult-Ch RS232

 

1 Features

  • RS-232 Bus-Pin ESD Protection Exceeds ±15 kV Using Human-Body Model (HBM)
  • Meets or Exceeds the Requirements of TIA/EIA-232-F and ITU v.28 Standards

  • Operates With 3-V to 5.5-V VCC Supply

  • Operates Up to 250 kbps

  • Two Drivers and Two Receivers

  • Low Standby Current: 1 μA Typical

  • External Capacitors: 4 × 0.1 μF

  • Accepts 5-V Logic Input With 3.3-V Supply

  • Alternative High-Speed Pin-Compatible Device (1 Mbps)

    – SNx5C3222

     

2 Applications

  • Battery-Powered Systems

  • PDAs

  • Notebooks

  • Laptops

  • Palmtop PCs

  • Hand-held Equipment

 

3 Description

The MAX3222 consists of two line drivers, two line receivers, and a dual charge-pump circuit with ±15-kV ESD protection pin to pin (serial-port connection pins, including GND). The device meets the requirements of TIA/EIA-232-F and provides the electrical interface between an asynchronous communication controller and the serial-port connector. The charge pump and four small external capacitors allow operation from a single 3-V to 5.5-V supply. The device operates at data signaling rates up to 250 kbit/s and a maximum of 30-V/μs driver output slew rate.

The MAX3222 can be placed in the power-down mode by setting PWRDOWN low, which draws only 1 μA from the power supply. When the device is powered down, the receivers remain active while the drivers are placed in the high-impedance state. Receiver outputs also can be placed in the high- impedance state by setting EN high.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

MAX3222CDW, MAX322IDW

SOIC (20)

12.80 mm × 7.50 mm

MAX3222CDB, MAX322IDB

SSOP (20)

7.20 mm × 5.30 mm

MAX3222CPW, MAX322IPW

TSSOP (20)

6.50 mm × 4.40 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us