SN65HVD32DR SN65HVD35DR UART Interface IC RS-422/RS-485 Interface IC 3.3V Full-Duplex RS-485
uart multiplexer ic
,uart level shifter ic
SN65HVD32DR SN65HVD35DR UART Interface IC RS-422/RS-485 Interface IC 3.3V Full-Duplex RS-485
1 Features
- 1/8 Unit-Load Option Available (Up to 256 Nodes on the Bus)
-
Bus-Pin ESD Protection Exceeds 15-kV HBM
-
Optional Driver Output Transition Times for Signaling Rates of 1 Mbps, 5 Mbps and 26 Mbps
– Line Signaling Rate is the Number of Voltage Transitions Made per Second Expressed in Units of bps (bits per second)
-
Low-Current Standby Mode: <1 μA
-
Glitch-Free Power-Up and Power-Down Protection
for Hot-Plugging Applications
-
5-V Tolerant Inputs
-
Bus Idle, Open, and Short-Circuit Failsafe
-
Driver Current Limiting and Thermal Shutdown
-
Designed for RS-422 and RS-485 Networks
-
5-V Devices Available, SN65HVD50-55
2 Applications
-
Utility Meters
-
DTE and DCE Interfaces
-
Industrial, Process, and Building Automation
-
Point-of-Sale (POS) Pins and Networks
3 Description
The SN65HVD3x devices are 3-state differential line drivers and differential-input line receivers that operate with 3.3-V power supply.
Each driver and receiver has separate input and output pins for full-duplex bus communication designs. They are designed for RS-422 and RS-485 data transmission over cable leCM GROUPhs of up to 1500 meters.
The SN65HVD30, SN65HVD31, and SN65HVD32 devices are fully enabled with no external enabling pins.
The SN65HVD33, SN65HVD34, and SN65HVD35 devices have active-high driver enables and active- low receiver enables. A low, less than 1 μA, standby current can be achieved by disabling both the driver and receiver.
All devices are characterized for ambient temperatures from –40°C to 85°C. Low power dissipation allows operation at temperatures up to 105°C or 125°C, depending on package option.
Device Information
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
SN65HVD30 |
SOIC (8) |
4.90 mm × 3.91 mm |
SN65HVD31 |
||
SN65HVD32 |
||
SN65HVD33 |
SOIC (14) |
8.65 mm × 3.91 mm |
VQFN (20) |
4.50 mm × 3.50 mm |
|
SN65HVD34 |
SOIC (14) |
8.65 mm × 3.91 mm |
SN65HVD35 |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
||
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
||
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
||
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
||
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
||
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
||
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|