SN65HVD235D UART Interface IC CAN Interface IC Standby Mode Auto Loop-back
uart multiplexer ic
,uart level shifter ic
SN65HVD235D UART Interface IC CAN Interface IC Standby Mode Auto Loop-back
1 Features
- Single 3.3-V Supply Voltage
-
Bus Pins Fault Protection Exceeds ±36 V
-
Bus Pins ESD Protection Exceeds ±16 kV HBM
-
Compatible With ISO 11898-2
-
GIFT/ICT Compliant
-
Data Rates up to 1 Mbps
-
Extended –7 V to 12 V Common Mode Range
-
High-Input Impedance Allows for 120 Nodes
-
LVTTL I/Os are 5-V Tolerant
-
Adjustable Driver Transition Times for Improved Emissions Performance
-
Unpowered Node Does Not Disturb the Bus
-
Low Current Standby Mode, 200-μA (Typical)
-
SN65HVD233: Loopback Mode
-
SN65HVD234: Ultra Low Current Sleep Mode
– 50-nA Typical Current Consumption
-
SN65HVD235: Autobaud Loopback Mode
-
Thermal Shutdown Protection
-
Power up and Down With Glitch-Free Bus Inputs and Outputs
-
– High-Input Impedance With Low VCC
-
– Monolithic Output During Power Cycling
-
2 Applications
-
Industrial Automation, Control, Sensors, and Drive Systems
-
Motor and Robotic Control
-
Building and Climate Control (HVAC)
-
Backplane Communication and Control
-
CAN Bus Standards such as CANopen, DeviceNet, CAN Kingdom, NMEA 2000, SAE J1939
3 Description
The SN65HVD233, SN65HVD234, and SN65HVD235 are used in applications employing the controller area network (CAN) serial communication physical layer in accordance with the ISO 11898 standard. As a CAN transceiver, each provides transmit and receive capability between the differential CAN bus and a CAN controller, with signaling rates up to 1 Mbps.
Designed for operation in especially harsh environments, the devices feature cross-wire protection, overvoltage protection up to ±36 V, loss of ground protection, overtemperature (thermal shutdown) protection, and common-mode transient protection of ±100 V. These devices operate over a wide –7 V to 12 V common-mode range. These transceivers are the interface between the host CAN controller on the microprocessor and the differential CAN bus used in industrial, building automation, transportation, and automotive applications.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
SN65HVD233 |
SOIC (8) |
4.90 mm × 3.91 mm |
|
SN65HVD234 |
||
|
SN65HVD235 |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|