SN65HVD1040QDRQ1 UART Interface IC CAN Interface IC Auto Cat EMC Opt CAN Transceiver
uart multiplexer ic
,uart level shifter ic
SN65HVD1040QDRQ1 UART Interface IC CAN Interface IC Auto Cat EMC Opt CAN Transceiver
1 Features
- Qualified for Automotive Applications
• AEC-Q100 Test Guidance With the Following:
-
– Device Temperature Grade 1: –40°C to 125°C Ambient Operating Temperature
-
– Device HBM ESD Classification Level:
– Level 3A for All Pins Except 1, 5, 6, and 7 – Level3BforPins1,5,6,and7
-
– Device CDM ESD Classification Level C6
-
– Device MM ESD Classification Level M3
-
Customer-Specific Configuration Control Can Be Supported Along With Major-Change Approval
-
Improved Drop-In Replacement for TJA1040
-
Meets or Exceeds the Requirements of ISO 11898-5
-
GIFT/ICT Compliant
-
ESD Protection up to ±8 kV (Human-Body Model) on Bus Pins
-
Low-Current Standby Mode With Bus Wakeup, <12 μA Maximum
-
High Electromagnetic Immunity (EMI)
-
Low Electromagnetic Emissions (EME)
-
Bus-Fault Protection of –27 V to 40 V
-
Dominant Time-Out Function
-
Thermal Shutdown Protection
-
Power-Up or Down Glitch-Free Bus Inputs and Outputs
-
– High Input Impedance With Low VCC
-
– Monotonic Outputs During Power Cycling SPACE
-
2 Applications
• GMW3122 Dual-Wire CAN Physical Layer
• SAE J2284 High-Speed CAN for Automotive Applications
• SAE J1939 Standard Data Bus Interface • ISO 11783 Standard Data Bus Interface • NMEA 2000 Standard Data Bus Interface • Industrial Automation
– DeviceNetTM Data Buses (Vendor ID #806)
3 Description
The SN65HVD1040-Q1 device meets or exceeds the specifications of the ISO 11898 standard for use in applications employing a Controller Area Network (CAN). The device is qualified for use in automotive applications.
As a CAN transceiver, this device provides differential transmit capability to the bus and differential receive capability to a CAN controller at signaling rates up to 1 megabit per second (Mbps). The signaling rate of a line is the number of voltage transitions that are made per second, expressed in the units bps (bits per second).
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
SN65HVD1040-Q1 |
SOIC (8) |
4.90 mm × 3.91 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|