Send Message
Home > products > Flash Memory IC Chip > SN65HVD08DR UART Interface IC RS-485 Interface IC 3.3/5-V RS-485 Transceiver

SN65HVD08DR UART Interface IC RS-485 Interface IC 3.3/5-V RS-485 Transceiver

manufacturer:
Manufacturer
Description:
1/1 Transceiver Half RS422, RS485 8-SOIC
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Packaging:
Cut Tape
Product:
RS-485 Transceivers
Brand:
Texas Instruments
Shutdown:
No Shutdown
Operating Supply Voltage:
3.3 V, 5 V
Product Type:
RS-485 Interface IC
Highlight:

uart multiplexer ic

,

uart level shifter ic

Introduction

SN65HVD08DR UART Interface IC RS-485 Interface IC 3.3/5-V RS-485 Transceiver

 

1 Features

  • Operates With a 3-V to 5.5-V Supply
  • Consumes Less Than 90-mW Quiescent Power

  • Open-Circuit, Short-Circuit, and Idle-Bus Failsafe Receiver

  • 1/8th Unit-Load (up to 256 nodes on the bus)

  • Bus-Pin ESD Protection Exceeds 16-kV HBM

  • Driver Output Voltage Slew-Rate Limited for Optimum Signal Quality at 10 Mbps

  • Electrically Compatible With ANSI TIA/EIA-485 Standard

     

2 Applications

  • Data Transmission With Remote Stations Powered From the Host

  • Isolated Multipoint Data Buses

  • Industrial Process Control Networks

  • Point-of-Sale Networks

  • Electric Utility Metering

 

3 Description

The SN65HVD08 combines a 3-state differential line driver and differential line receiver designed for balanced data transmission and interoperation with ANSI TIA/EIA-485-A and ISO-8482E standard- compliant devices.

The wide supply voltage range and low quiescent current requirements allow the SN65HVD08s to operate from a 5-V power bus in the cable with as much as a 2-V line voltage drop. Busing power in the cable can alleviate the need for isolated power to be generated at each connection of a ground-isolated bus.

The driver differential outputs and receiver differential inputs connect internally to form a differential input/output (I/O) bus port that is designed to offer minimum loading to the bus whenever the driver is disabled or not powered. The drivers and receivers have active-high and active-low enables respectively, which can be externally connected together to function as a direction control.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

SN75HVD08, SN65HVD08

SOIC (8)

4.90 mm × 3.91 mm

PDIP (8)

9.81 mm × 6.35 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us