SN65LVDS1DBVR SN65LVDS2DBVR UART Interface IC LVDS Interface IC High Speed Diff Line
uart multiplexer ic
,uart level shifter ic
SN65LVDS1DBVR SN65LVDS2DBVR UART Interface IC LVDS Interface IC High Speed Diff Line
1 Features
- Meets or Exceeds the ANSI TIA/EIA-644 Standard
-
Designed for Signaling Rates (1) up to:
-
– 630 Mbps for Drivers
-
– 400 Mbps for Receivers
-
-
Operates From a 2.4-V to 3.6-V Supply
-
Available in SOT-23 and SOIC Packages
-
Bus-Terminal ESD Exceeds 9 kV
-
Low-Voltage Differential Signaling With Typical Output Voltages of 350 mV Into a 100-Ω Load
-
Propagation Delay Times
-
– 1.7-ns Typical Driver
-
– 2.5-ns Typical Receiver
-
-
Power Dissipation at 200 MHz
-
– 25 mW Typical Driver
-
– 60 mW Typical Receiver
-
-
LVDT Receiver Includes Line Termination
-
Low Voltage TTL (LVTTL) Level Driver Input Is 5- V Tolerant
-
Driver Is Output High-Impedance with VCC<1.5V
-
Receiver Output and Inputs are High-Impedance With VCC < 1.5 V
-
Receiver Open-Circuit Fail Safe
-
Differential Input Voltage Threshold Less Than 100 mV
2 Applications
• Wireless Infrastructure
• Telecom Infrastructure
• Printer
3 Description
The SN65LVDS1, SN65LVDS2, and SN65LVDT2 devices are single, low-voltage, differential line drivers and receivers in the small-outline transistor package. The outputs comply with the TIA/EIA-644 standard and provide a minimum differential output voltage magnitude of 247 mV into a 100-Ω load at signaling rates up to 630 Mbps for drivers and 400 Mbps for receivers.
When the SN65LVDS1 device is used with an LVDS receiver (such as the SN65LVDT2) in a point-to-point connection, data or clocking signals can be transmitted over printed-circuit board traces or cables at very high rates with very low electromagnetic emissions and power consumption. The packaging, low power, low EMI, high ESD tolerance, and wide supply voltage range make the device ideal for battery-powered applications.
The SN65LVDS1, SN65LVDS2, and SN65LVDT2 devices are characterized for operation from –40°C to 85°C.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
SN65LVDS1 |
SOIC (8) |
4.90 mm × 3.91 mm |
|
SOT (5) |
2.90 mm × 1.60 mm |
|
|
SN65LVDS2 |
SOIC (8) |
4.90 mm × 3.91 mm |
|
SOT (5) |
2.90 mm × 1.60 mm |
|
|
SN65LVDT2 |
SOIC (8) |
4.90 mm × 3.91 mm |
|
SOT (5) |
2.90 mm × 1.60 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|