Send Message
Home > products > Flash Memory IC Chip > LTC1485IS8#TRPBF UART Interface IC RS-232 Interface IC 1x 5V RS232/RS485 Multiprotocol Tran

LTC1485IS8#TRPBF UART Interface IC RS-232 Interface IC 1x 5V RS232/RS485 Multiprotocol Tran

manufacturer:
Manufacturer
Description:
IC TRANSCEIVER HALF 1/1 8SOIC
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Subcategory:
Interface ICs
Product Type:
RS-485 Interface IC
Brand:
Analog Devices
Packaging:
MouseReel
Operating Supply Current:
1.8 MA
Package / Case:
SO-8
Highlight:

uart multiplexer ic

,

uart level shifter ic

Introduction

LTC1485IS8#TRPBF UART Interface IC RS-232 Interface IC 1x 5V RS232/RS485 Multiprotocol Tran

 

FEATURES

n ESD Protection Over ±10kV
n Low Power: ICC = 1.8mA Typ
n 28ns Typical Driver Propagation Delays with 4ns Skew

n Designed for RS485 or RS422 Applications
n Single 5V Supply
n −7V to 12V Bus Common-Mode Range Permits ±7V Ground Difference Between Devices on the Bus n Thermal Shutdown Protection
n Power-Up/Down Glitch-Free Driver Outputs
n Driver Maintains High Impedance in Three-State or with the Power Off
n Combined Impedance of a Driver Output and Receiver Allows up to 32 Transceivers on the Bus n 60mV Typical Input Hysteresis
n Pin-Compatible with the SN75176A, DS75176A, and SN75LBC176

 

APPLICATIONS

n Low Power RS485/RS422 Transceiver

n Level Translator

 

DESCRIPTION

The LTC®1485 is a low power differential bus/line trans- ceiver designed for multipoint data transmission standard RS485 applications with extended common-mode range (12V to –7V). It also meets the requirements of RS422.

The CMOS with Schottky design offers significant power savings over its bipolar counterpart without sacrificing ruggedness against overload or ESD damage.

The driver and receiver feature three-state outputs, with the driver outputs maintaining high impedance over the entire common-mode range. Excessive power dissipa- tion caused by bus contention or faults is prevented by a thermal shutdown circuit which forces the driver outputs into a high impedance state. I/O pins are protected against multiple ESD strikes of over ±10kV.

The receiver has a fail-safe feature which guarantees a high output state when the inputs are left open.

Both AC and DC specifications are guaranteed from –40°C to 85°C and 4.75V to 5.25V supply voltage range.

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us