Send Message
Home > products > Flash Memory IC Chip > SN65HVD251DR UART Interface IC CAN Type STANDBY MODE High Input Impedance

SN65HVD251DR UART Interface IC CAN Type STANDBY MODE High Input Impedance

manufacturer:
Manufacturer
Description:
1/1 Transceiver Half CANbus 8-SOIC
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Supply Voltage - Min:
4.5 V
Supply Voltage - Max:
5.5 V
Minimum Operating Temperature:
- 40 C
Maximum Operating Temperature:
+ 125 C
Product Type:
CAN Interface IC
Protocol Supported:
CAN
Highlight:

uart multiplexer ic

,

uart level shifter ic

Introduction

SN65HVD251DR UART Interface IC CAN Interface IC STANDBY MODE

 

1 Features

  • Drop-In Improved Replacement for the PCA82C250 and PCA82C251
  • Bus-Fault Protection of ±36 V

  • Meets or Exceeds ISO 11898

  • Signaling Rates(1) up to 1 Mbps

  • High Input Impedance Allows up to 120 Nodes on a Bus

  • Bus Pin ESD Protection Exceeds 14 kV HBM

  • Unpowered Node Does Not Disturb the Bus

  • Low-Current Standby Mode: 200-μA Typical

  • Thermal Shutdown Protection

  • Glitch-Free Power-Up and Power-Down CAN Bus Protection for Hot-Plugging

  • DeviceNet Vendor ID #806

     

2 Applications

  • CAN Data Buses
  • Industrial Automation
  • SAE J1939 Standard Data Bus Interface NMEA 2000 Standard Data Bus Interface

 

3 Description

The HVD251 is intended for use in applications employing the Controller Area Network (CAN) serial communication physical layer in accordance with the ISO 11898 Standard. The HVD251 provides differential transmit capability to the bus and differential receive capability to a CAN controller at speeds up to 1 megabits per second (Mbps).

Designed for operation in harsh environments, the device features cross-wire, overvoltage and loss of ground protection to ±36 V. Also featured are overtemperature protection as well as –7-V to 12-V common-mode range, and tolerance to transients of ±200 V. The transceiver interfaces the single-ended CAN controller with the differential CAN bus found in industrial, building automation, and automotive applications.

Rs, pin 8, selects one of three different modes of operation: high-speed, slope control, or low-power mode. The high-speed mode of operation is selected by connecting pin 8 to ground, allowing the transmitter output transistors to switch as fast as possible with no limitation on the rise and fall slope. The rise and fall slope can be adjusted by connecting a resistor to ground at pin 8; the slope is proportional to the pin's output current. Slope control with an external resistor value of 10 kΩ gives about 15-V / μs slew rate; 100 kΩ gives about 2-V/μs slew rate.

If a high logic level is applied to the Rs pin 8, the device enters a low-current standby mode where the driver is switched off and the receiver remains active. The local protocol controller returns the device to the normal mode when it transmits to the bus.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

SN55HVD251

WSON (8)

4.00 mm × 4.00 mm

SN65HVD251

SOIC (8)

4.90 mm × 3.91 mm

PDIP (8)

9.81 mm × 6.35 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us