Send Message
Home > products > Flash Memory IC Chip > ACNT-H61L-500E Integrated Circuits High Speed Optocouplers Optocoupler (10MBd) 14.2mm

ACNT-H61L-500E Integrated Circuits High Speed Optocouplers Optocoupler (10MBd) 14.2mm

manufacturer:
Manufacturer
Description:
Logic Output Optoisolator 10MBd Push-Pull, Totem Pole 7500Vrms 1 Channel 20kV/µs CMTI 8-SO Stretched
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Vr - Reverse Voltage:
5 V
If - Forward Current:
7 MA
Vf - Forward Voltage:
1.38 V
Isolation Voltage:
7500 Vrms
Minimum Operating Temperature:
- 40 C
Maximum Operating Temperature:
+ 105 C
Highlight:

integrated circuit chip

,

radio frequency integrated circuit

Introduction

ACNT-H61L-500E Integrated Circuits High Speed Optocouplers Optocoupler (10MBd) 14.2mm

 

Description

The ACNT-H61L is a stretched wide optically coupled optocoupler that combines a light-emitting diode and an integrated high gain photo detector to address the low power need for isolated interface. The optocoupler consumes extremely low power, at maximum 2 mA across temperature. The LED forward current operates from 4.5 mA.

This optocoupler supports both a 3.3V and a 5V supply voltage with guaranteed AC and DC operational parameters from temperature range –40°C to +105°C. The output of the detector IC is a CMOS output. The internal Faraday shield provides a guaranteed common-mode transient immunity specification of 20 kV/μs.

The ACNT-H61L with 15-mm stretched SO-8 package and high voltage insulation capability is suitable for isolated communicate logic interface and control in high-voltage power systems such as 690VAC drives, renewable inverters, and medical equipment.

 

Features

 Low IDD power supply consumption: 2 mA max.
 Input current capability: 4.5 mA min.
 Package: 15-mm stretched SO-8.
 20 kV/μs minimum common-mode rejection (CMR) at VCM = 1000 V.
 High speed: 10 MBd min.
 Guaranteed AC and DC performance over wide temperature range: –40°C to +105°C.

 Safety approval:

  • UL 1577 recognized: 7500 Vrms for 1 minute

  • CSA approval

  • IEC/EN 60747-5-5 VIORM = 2262 Vpeak for reinforced insulation

     

Applications

  •  Communication Interface: RS-485, CAN bus

  •  Digital isolation for A/D, D/A conversion

  •  High-voltage power systems, e.g., 690V drives

  •  Renewable energy inverters

  •  Medical imaging and patient monitoring

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us