CC1125RHBR Digital RF Integrated Circuits RF Ultra Hi Perf RF Narrowbd Transceiver
microwave integrated circuits
,integrated circuit chip
CC1125RHBR RF Integrated Circuits RF Ultra-Hi Perf RF Narrowbd Transceiver
1 Features
-
High-Performance, Single-Chip Transceiver
-
– Adjacent Channel Selectivity: 67 dB at
6.25-kHz Offset
-
– Blocking Performance: 104 dB at 10 MHz
-
– Excellent Receiver Sensitivity
-
–129 dBm at 300 bps
-
–123 dBm at 1.2 kbps
-
–110 dBm at 50 kbps
-
-
– Very Low Phase Noise: –115 dBc/Hz at 10-kHz Offset
-
-
Suitable for Systems Targeting ETSI Category 1
-
Separate 128-Byte RX and TX FIFOs
-
Support for Seamless Integration With the CC1190
Device for Increased Range Giving up to 3-dB Improvement in Sensitivity and up to +27-dBm Output Power
-
High Spectral Efficiency (9.6 kbps in 12.5-kHz Channel in Compliance With FCC Narrowbanding Mandate)
-
Power Supply
-
– Wide Supply Voltage Range (2.0 V to 3.6 V)
-
– Low Current Consumption:
-
RX: 2 mA in RX Sniff Mode
-
RX: 17 mA Peak Current in Low-Power
Mode
-
RX: 26 mA Peak Current in High-
Performance Mode
-
TX:47mAat+14dBm
-
-
– Power Down: 0.12 μA (0.5 μA With Enhanced Wake-On-Radio (eWOR) Timer Running)
-
2 Applications
-
Social Alarms
-
Narrowband Ultra-Low-Power Wireless Systems With Channel Spacing Down to 4 kHz
-
169-, 315-, 433-, 868-, 915-, 920-, 950-MHz ISM/SRD Band Systems
-
Wireless Metering and Wireless Smart Grid (AMR and AMI)
3 Description
The CC1125 device is a fully integrated single-chip radio transceiver designed for high performance at very low-power and low-voltage operation in cost-effective wireless systems. All filters are integrated, thus removing the need for costly external SAW and IF filters. The device is mainly intended for the ISM (Industrial, Scientific and Medical) and SRD (Short Range Device) frequency bands at 164–192 MHz, 274–320 MHz, 410–480 MHz, and 820–960 MHz.
The CC1125 device provides extensive hardware support for packet handling, data buffering, burst transmissions, clear channel assessment, link quality indication, and Wake-On-Radio. The main operating parameters of the CC1125 device can be controlled through an SPI interface. In a typical system, the CC1125 device will be used with a microcontroller and only a few external passive components.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE |
|
CC1125RHB |
VQFN (32) |
5.00 mm x 5.00 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|