DAC101S101CIMK/NOPB Data Converter IC Digital to Analog Converters - DAC 10B MicroPwr RRO DAC
dac integrated circuit
,da converter chip
DAC101S101CIMK/NOPB Data Converter IC Digital to Analog Converters - DAC 10B MicroPwr RRO DAC
1 Features
- DAC101S101Q is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow.
-
Ensured Monotonicity
-
Low Power Operation
-
Rail-to-Rail Voltage Output
-
Power-on Reset to Zero Volts Output
-
Wide Temperature Range of −40°C to +125°C
-
Wide Power Supply Range of 2.7 V to 5.5 V
-
Small Packages
-
Power Down Feature
-
Resolution 10 bits
-
DNL +0.15, –0.05 LSB (typical)
-
Output Settling Time 8 μs (typical)
-
Zero Code Error 3.3 mV (typical)
-
Full-Scale Error −0.06 %FS (typical)
-
Power Consumption
-
– Normal Mode, 0.63 mW (3.6 V) / 1.41 mW (5.5 V) typical
-
– Power Down Mode, 0.14 μW (3.6 V) / 0.33 μW (5.5 V) typical
-
2 Applications
-
Battery-Powered Instruments
-
Digital Gain and Offset Adjustment
-
Programmable Voltage & Current Sources
-
Programmable Attenuators
-
Automotive
3 Description
The DAC101S101 is a full-featured, general purpose 10-bit voltage-output digital-to-analog converter (DAC) that can operate from a single +2.7 V to 5.5 V supply and consumes just 175 μA of current at 3.6 Volts. The on-chip output amplifier allows rail-to-rail output swing and the three wire serial interface operates at clock rates up to 30 MHz over the specified supply voltage range and is compatible with standard SPI, QSPI, MICROWIRE and DSP interfaces. Competitive devices are limited to 20 MHz clock rates at supply voltages in the 2.7 V to 3.6 V range.
The supply voltage for the DAC101S101 serves as its voltage reference, providing the widest possible output dynamic range. A power-on reset circuit ensures that the DAC output powers up to zero volts and remains there until there is a valid write to the device. A power-down feature reduces power consumption to less than a microWatt.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
DAC101S101 |
VSSOP (8) |
3.00 mm × 3.00 mm |
|
DAC101S101, DAC101S101-Q1 |
SOT-23 (6) |
1.60 mm × 2.90 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|