SN74LVC74APWR Programmable Logic ICS Triggered D-Type Flip-Flops With Clear And Preset 14-TSSOP -40 to 125
SN74LVC74APWR Programmable Logic ICS Triggered D-Type Flip-Flops With Clear And Preset 14-TSSOP -40 to 125
1 Features
- Operate From 1.65 V to 3.6 V
Inputs Accept Voltages to 5.5 V
Maximum tpd of 5.2 ns at 3.3 V
Typical VOLP (Output Ground Bounce) <0.8VatVCC =3.3V,TA =25°C
Typical VOHV (Output VOH Undershoot) >2VatVCC =3.3V,TA =25°C
Latch-Up Performance Exceeds 250 mA Per JESD 17
ESD Protection Exceeds JESD 22
– 2000-V Human-Body Model (A114-A)
– 1000-V Charged-Device Model (C101)
2 Applications
Servers
Medical, Healthcare, and Fitness
Telecom Infrastructures
TVs, Set-Top Boxes, and Audio
Test and Measurement
Industrial Transport
Wireless Infrastructure
Enterprise Switching
Motor Drives
Factory Automation and Control
3 Description
The SNx4LVC74A devices integrate two positive- edge triggered D-type flip-flops in one convenient device.
The SN54LVC74A is designed for 2.7-V to 3.6-V VCC operation, and the SN74LVC74A is designed for 1.65-V to 3.6-V VCC operation.
A low level at the preset (PRE) or clear (CLR) inputs sets or resets the outputs, regardless of the levels of the other inputs. When PRE and CLR are inactive (high), data at the data (D) input meeting the setup time requirements is transferred to the outputs on the positive-going edge of the clock pulse. Clock triggering occurs at a voltage level and is not directly related to the rise time of the clock pulse. Following the hold-time interval, data at the D input can be changed without affecting the levels at the outputs.
The data I/Os and control inputs are overvoltage tolerant. This feature allows the use of these devices for down-translation in a mixed-voltage environment.
Device Information
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
SNJ54LVC74AFK | LCCC (20) | 8.89 mm × 8.89 mm |
SNJ54LVC74AJ | CDIP (14) | 19.56 mm × 6.67 mm |
SNJ54LVC74AW | CFP (14) | 9.21 mm × 5.97 mm |
SN74LVC74AD | SOIC (14) | 8.65 mm × 3.91 mm |
SN74LVC74ADB | SSOP (14) | 6.20 mm × 5.30 mm |
SN74LVC74ANS | SO (14) | 10.30 mm × 5.30 mm |
SN74LVC74APW | TSSOP (14) | 5.00 mm × 4.40 mm |
SN74LVC74ARGY | VQFN (14) | 3.50 mm × 3.50 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|