OPA2322AQDGKRQ1 Audio Power Amplifier IC Op Amps Auto 20MHz 1.8V RRIO CMOS Op Amp
digital audio amplifier ic
,audio preamplifier ic
OPA2322AQDGKRQ1 Audio Power Amplifier IC Op Amps Auto 20MHz 1.8V RRIO CMOS Op Amp
1 Features
- Qualified for Automotive Applications
-
AEC-Q100 Qualified With the Following Results:
-
– Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
-
– Device HBM ESD Classification Level H3A
-
– Device CDM ESD Classification Level C5
-
-
Gain Bandwidth: 20 MHz
-
Low Noise: 8.5 nV√Hz at 1 kHz
-
Slew Rate: 10 V/μs
-
Low THD+N: 0.0005%
-
Rail-to-Rail I/O
-
Offset Voltage: 2 mV (Maximum)
-
Supply Voltage: 1.8 V to 5.5 V
-
Supply Current:
-
– Single-Supply Current: 1.6 mA/ch
-
– Dual-Supply Current: 1.5 mA/ch
-
– Quad-Supply Current: 1.4 mA/ch
-
-
Unity-Gain Stable
-
Small Packages:
– SOT-23, VSSOP, TSSOP
2 Applications
-
Automotive
-
Sensor Signal Conditioning
-
Consumer Audio
-
Multi-Pole Active Filters
-
Control-Loop Amplifiers
-
Communications
-
Security
-
Scanners
3 Description
The OPAx322-Q1 series consists of single-, dual-, and quad-channel CMOS operational amplifiers featuring low noise and rail-to-rail inputs and outputs optimized for low-power, single-supply applications. Specified over a wide supply range from 1.8 V to 5.5 V, the low quiescent current of only 1.5 mA per channel makes these devices well-suited for power- sensitive applications.
The combination of very-low noise (8.5 nV√Hz at 1 kHz), high-gain bandwidth (20 MHz), and fast slew rate (10 V/μs) make the OPAx322-Q1 family ideal for a wide range of applications, including signal conditioning and sensor amplification requiring high gains. Featuring low THD+N, the OPAx322-Q1 family is also excellent for consumer audio applications, particularly for single-supply systems.
The OPA322-Q1 (single version) is available in 5-pin SOT-23 package, while the OPA2322-Q1 (dual version) is offered in a 8-pin VSSOP package. The OPA4322-Q1 (quad version) is available in a 14-pin TSSOP package. All versions are specified for operation from –40°C to +125°C.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
OPA322-Q1 |
SOT-23 (5) |
2.90 mm × 1.60 mm |
|
OPA2322-Q1 |
VSSOP (8) |
3.00 mm × 3.00 mm |
|
OPA4322-Q1 |
TSSOP (14) |
5.00 mm × 4.40 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|