AMC1200SDUBR Audio Power Amplifier IC Isolation Amplifiers 4kV peak Iso Amp
digital audio amplifier ic
,audio preamplifier ic
AMC1200SDUBR Audio Power Amplifier IC Isolation Amplifiers 4kV peak Iso Amp
1 Features
- ±250-mV Input Voltage Range Optimized for Shunt Resistors
-
Very Low Nonlinearity: 0.075% Maximum at 5 V
-
Low Offset Error: 1.5 mV Maximum
-
Low Noise: 3.1 mVRMS Typical
-
Low High-Side Supply Current: 8mAMaximumat5V
-
Input Bandwidth: 60 kHz Minimum
-
Fixed Gain: 8 (0.5% accuracy)
-
High Common Mode Rejection Ratio: 108 dB
-
3.3-V Operation on Low-Side
-
Certified Galvanic Isolation:
-
– UL1577 and VDE V 0884-10 Approved
-
– Isolation Voltage: 4250 VPEAK (AMC1200B)
-
– Working Voltage: 1200 VPEAK
-
– Transient Immunity: 10 kV/μs Minimum
-
-
Typical 10-Year Lifespan at Rated Working Voltage (see Application Report SLLA197)
-
Fully Specified Over the Extended Industrial Temperature Range
2 Applications
• Shunt Resistor Based Current Sensing in:
--Motor Control
--Green Energy
--Frequency Inverters Uninterruptible Power Supplies
3 Description
The AMC1200 and AMC1200B are precision isolation amplifiers with an output separated from the input circuitry by a silicon dioxide (SiO2) barrier that is highly resistant to magnetic interference. This barrier has been certified to provide galvanic isolation of up to 4250 VPEAK (AMC1200B) or 4000 VPEAK (AMC1200) according to UL1577 and VDE V 0884- 10. Used in conjunction with isolated power supplies, these devices prevent noise currents on a high common mode voltage line from entering the local ground and interfering with or damaging sensitive circuitry.
The input of the AMC1200 or AMC1200B is optimized for direct connection to shunt resistors or other low voltage level signal sources. The excellent performance of the device supports accurate current control resulting in system-level power saving and, especially in motor-control applications, lower torque ripple. The common mode voltage of the output signal is automatically adjusted to either the 3-V or 5-V low-side supply.
The AMC1200 and AMC1200B are fully specified over the extended industrial temperature range of –40°C to 105°C and are available in a wide-body SOIC-8 package (DWV) and a gullwing-8 package (DUB).
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
AMC1200, AMC1200B |
SOP (8) |
9.50 mm × 6.57 mm |
|
SOIC (8) |
5.85 mm × 7.50 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|