OPA170AIDBVR Audio Power Amplifier IC Precision Amplifiers 36V,MICROPOWER,RRO GEN PURP OP AMP
audio preamplifier ic
,stereo amplifier ic chip
OPA170AIDBVR Audio Power Amplifier IC Precision Amplifiers 36V,MICROPOWER,RRO GEN PURP OP AMP
1 Features
- Supply Range: 2.7 V to 36 V, ±1.35 V to ±18 V
-
Low Noise: 19 nV/√Hz
-
RFI Filtered Inputs
-
Input Range Includes the Negative Supply
-
Input Range Operates to Positive Supply
-
Rail-to-Rail Output
-
Gain Bandwidth: 1.2 MHz
-
Low Quiescent Current: 110 μA per Amplifier
-
High Common-Mode Rejection: 120 dB
-
Low Bias Current: 15 pA (Maximum)
-
Industry-Standard Packages and micro Packages Available
-
Create a Custom Design Using the OPAx170 With the WEBENCH® Power Designer
2 Applications
-
Tracking Amplifier in Power Modules
-
Merchant Power Supplies
-
Transducer Amplifiers
-
Bridge Amplifiers
-
Temperature Measurements
-
Strain Gauge Amplifiers
-
Precision Integrators
-
Battery-Powered Instruments
-
Test Equipment
3 Description
The OPA170, OPA2170, and OPA4170 devices (OPAx170) are a family of 36-V, single-supply, low- noise operational amplifiers (op amps) that feature micro packages with the ability to operate on supplies ranging from 2.7 V (±1.35 V) to 36 V (±18 V). They offer good offset, drift, and bandwidth with low quiescent current. The single, dual, and quad versions all have identical specifications for maximum design flexibility.
Unlike most op amps, which are specified at only one supply voltage, the OPAx170 family of op amps is specified from 2.7 V to 36 V. Input signals beyond the supply rails do not cause phase reversal. The OPAx170 family is stable with capacitive loads up to 300 pF. The input can operate 100 mV below the negative rail and within 2 V of the positive rail for normal operation. Note that these devices can operate with full rail-to-rail input 100 mV beyond the positive rail, but with reduced performance within 2 V of the positive rail. The OPAx170 op amps are specified from –40°C to +125°C.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
OPA170 |
SOIC (8) |
4.90 mm × 3.91 mm |
|
SOT (5) |
1.60 mm × 1.20 mm |
|
|
SOT-23 (5) |
2.90 mm × 1.60 mm |
|
|
OPA2170 |
SOIC (8) |
4.90 mm × 3.91 mm |
|
VSSOP (8) |
3.00 mm × 3.00 mm |
|
|
VSSOP (8), micro size |
2.30 mm × 2.00 mm |
|
|
WSON (8) |
2.00 mm × 2.00 mm |
|
|
OPA4170 |
SOIC (14) |
8.65 mm × 3.91 mm |
|
TSSOP (14) |
5.00 mm × 4.40 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|