LM5118MHX/NOPB Power Regulator IC Switching Controllers Wide Vtg Range Buck-Boost Cntlr
electronic voltage regulator circuit
,variable voltage regulator ic
LM5118MHX/NOPB Power Regulator IC Switching Controllers Wide Vtg Range Buck-Boost Cntlr
1 Features
- Ultra-Wide Input Voltage Range From 3 V to 75 V
-
Emulated Peak Current Mode Control
-
Smooth Transition Between Step-Down and Step- Up Modes
-
Switching Frequency Programmable to 500 KHz
-
Oscillator Synchronization Capability
-
Internal High Voltage Bias Regulator
-
Integrated High and Low-Side Gate Drivers
-
Programmable Soft-Start Time
-
Ultra-Low Shutdown Current
-
Enable Input Wide Bandwidth Error Amplifier
-
1.5% Feedback Reference Accuracy
-
Thermal Shutdown
-
Package: 20-Pin HTSSOP (Exposed Pad)
-
Create a Custom Design Using the LM5118 With the WEBENCH® Power Designer
2 Applications
- Industrial Buck-Boost Supplies
3 Description
The LM5118 wide voltage range Buck-Boost switching regulator controller features all of the functions necessary to implement a high- performance, cost-efficient Buck-Boost regulator using a minimum of external components. The Buck- Boost topology maintains output voltage regulation when the input voltage is either less than or greater than the output voltage, making it especially suitable for automotive applications. The LM5118 operates as a buck regulator while the input voltage is sufficiently greater than the regulated output voltage and gradually transitions to the buck-boost mode as the input voltage approaches the output. This dual-mode approach maintains regulation over a wide range of input voltages with optimal conversion efficiency in the buck mode and a glitch-free output during mode transitions. This easy-to-use controller includes drivers for the high-side buck MOSFET and the low- side boost MOSFET. The regulators control method is based upon current mode control using an emulated current ramp. Emulated current mode control reduces noise sensitivity of the pulse-width modulation circuit, allowing reliable control of the very small duty cycles necessary in high input voltage applications. Additional protection features include current limit, thermal shutdown and an enable input. The device is available in a power-enhanced, 20-pin HTSSOP package featuring an exposed die attach pad to aid thermal dissipation.
Device Information
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
LM5118 |
HTSSOP (20) |
6.50 mm × 4.40 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
||
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
||
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
||
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
||
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
||
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
||
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|