Send Message
Home > Products > Flash Memory IC Chip > LM25576MHX/NOPB Power Regulator IC Switching Voltage Regulators 42V 3A SD Switch Reg

LM25576MHX/NOPB Power Regulator IC Switching Voltage Regulators 42V 3A SD Switch Reg

Manufacturer:
MFG
Description:
Buck Switching Regulator IC Positive Adjustable 1.225V 1 Output 3A 20-PowerTSSOP (0.173", 4.40mm Width)
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Input Voltage MIN:
6 V
Switching Frequency:
50 KHz To 1000 KHz
Minimum Operating Temperature:
- 40 C
Maximum Operating Temperature:
+ 125 C
Packaging Kit:
Cut Tape
Operating Temperature Range:
- 40 C To + 125 C
High Light:

digital voltage regulator ic

,

electronic voltage regulator circuit

Introduction

LM25576MHX/NOPB Power Regulator IC Switching Voltage Regulators 42V 3A SD Switch Reg

 

1 Features

  • Integrated 42-V, 170-mΩ N-channel MOSFET
  • Ultra-Wide Input Voltage Range from 6 V to 42 V

  • Adjustable Output Voltage as Low as 1.225 V

  • 1.5% Feedback Reference Accuracy

  • Operating Frequency Adjustable Between 50 kHz and 1 MHz with Single Resistor

  • Master or Slave Frequency Synchronization

  • Adjustable Soft-Start

  • Emulated Current Mode Control Architecture

  • Wide Bandwidth Error Amplifier

  • Built-in Protection

  • HTSSOP-20EP (Exposed Pad)

  • Create a Custom Design Using the LM25576 With the WEBENCH® Power Designer

 

2 Applications

• Industrial

 

3 Description

The LM25576 is an easy to use buck regulator which allows design engineers to design and optimize a robust power supply using a minimum set of components. Operating with an input voltage range of 6 V to 42 V, the LM25576 delivers 3 A of continuous output current with an integrated 170-mΩ N-Channel MOSFET. The regulator utilizes an Emulated Current Mode architecture which provides inherent line regulation, tight load transient response, and ease of loop compensation without the usual limitation of low- duty cycles associated with current mode regulators. The operating frequency is adjustable from 50 kHz to 1 MHz to allow optimization of size and efficiency. To reduce EMI, a frequency synchronization pin allows multiple IC’s from the LM(2)557x family to self- synchronize or to synchronize to an external clock. The LM25576 ensures robustness with cycle-by-cycle current limit, short-circuit protection, thermal shut- down, and remote shut-down. The device is available in a power enhanced HTSSOP-20 package featuring an exposed die attach pad for thermal dissipation. The LM25576 is supported by the full suite of WEBENCH® On-Line design tools.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

LM25576

HTSSOP (20)

6.50 mm × 4.40 mm

 

Send RFQ
Stock:
MOQ:
Contact us