LM3481MMX LM3481MMX/NOPB LM3481QMM Power Path Management IC Switching Controllers
power management integrated circuit
,microchip battery management
LM3481MMX LM3481MMX/NOPB LM3481QMM Power Path Management IC Switching Controllers
1 Features
- LM3481QMM are Automotive-Grade Products That are AEC-Q100 Grade 1 Qualified (–40°C to +125°C Operating Junction Temperature)
-
10-Lead VSSOP Package
-
Internal Push-Pull Driver With 1-A Peak Current Capability
-
Current Limit and Thermal Shutdown
-
Frequency Compensation Optimized With a Capacitor and a Resistor
-
Internal Softstart
-
Current Mode Operation
-
Adjustable Undervoltage Lockout With Hysteresis
-
Pulse Skipping at Light Loads
-
Key Specifications
-
– Wide Supply Voltage Range of 2.97 V to 48 V
-
– 100-kHz to 1-MHz Adjustable and Synchronizable Clock Frequency
-
– ±1.5% (Over Temperature) Internal Reference
-
– 10-μA Shutdown Current (Over Temperature)
-
-
Create a Custom Design Using the LM3481 with
the WEBENCH Power Designer
2 Applications
-
Automotive Start-Stop Applications
-
Automotive ADAS Driver Information
-
One Cell/Two Cell Li-ion Battery Powered Portable Bluetooth Audio Systems
-
Notebooks, PDAs, Digital Cameras, and Other Portable Applications
3 Description
The LM3481 device is a versatile Low-Side N-FET high-performance controller for switching regulators. The device is designed for use in Boost, SEPIC and Flyback converters and topologies requiring a low- side FET as the primary switch. The LM3481 device can be operated at very high switching frequencies to reduce the overall solution size. The switching frequency of the LM3481 device can be adjusted to any value between 100kHz and 1MHz by using a single external resistor or by synchronizing it to an external clock. Current mode control provides superior bandwidth and transient response in addition to cycle-by-cycle current limiting. Current limit can be programmed with a single external resistor.
The LM3481 device has built-in protection features such as thermal shutdown, short-circuit protection and overvoltage protection. Power-saving shutdown mode reduces the total supply current to 5 μA and allows power supply sequencing. Internal soft-start limits the inrush current at start-up. Integrated current slope compensation simplifies the design and, if needed for specific applications, can be increased using a single resistor.
Device Information
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
LM3481 |
VSSOP (10) |
3.00 mm × 3.00 mm |
LM3481-Q1 |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
||
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
||
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
||
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
||
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
||
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
||
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
||
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|