Send Message
Home > products > Flash Memory IC Chip > LP2996AMRE/NOPB Power Path Management IC Power Management Specialized - PMIC DDR Termination Regulator

LP2996AMRE/NOPB Power Path Management IC Power Management Specialized - PMIC DDR Termination Regulator

manufacturer:
Manufacturer
Description:
DDR Terminator PMIC 8-SO PowerPad
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Unit Weight:
0.002924 Oz
Subcategory:
PMIC - Power Management ICs
Product Type:
Power Management Specialized - PMIC
Operating Supply Current:
320 UA
Moisture Sensitive:
Yes
Brand:
Texas Instruments
Highlight:

battery charge management ic

,

power management integrated circuit

Introduction

LP2996AMRE/NOPB Power Path Management IC Power Management Specialized - PMIC DDR Termination Regulator

 

1 Features

  • 1.35V Minimum VDDQ
  • Source and Sink Current

  • Low Output Voltage Offset

  • No External Resistors Required

  • Linear Topology

  • Suspend to Ram (STR) Functionality

  • Low External Component Count

  • Thermal Shutdown

  • LP2998/8Q recommended for -40°C to 125°C

     

2 Applications

  • DDR1, DDR2, DDR3, and DDR3L Termination Voltage
  • FPGA

  • Industrial/Medical PC

  • SSTL-2 and SSTL-3 Termination

  • HSTL Termination

 

3 Description

The LP2996A linear regulator is designed to meet the JEDEC SSTL-2 specifications for termination of DDR- SDRAM. The device also supports DDR2, DDR3 and DDR3L VTT bus termination with VDDQ min of 1.35V. The device contains a high-speed operational amplifier to provide excellent response to load transients. The output stage prevents shoot through while delivering 1.5A continuous current and transient peaks up to 3A in the application as required for DDR-SDRAM termination. The LP2996A also incorporates a VSENSE pin to provide superior load regulation and a VREF output as a reference for the chipset and DIMMs.

An additional feature found on the LP2996A is an active low shutdown (SD) pin that provides Suspend To RAM (STR) functionality. When SD is pulled low the VTT output will tri-state providing a high impedance output, but, VREF will remain active. A power savings advantage can be obtained in this mode through lower quiescent current.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

LP2996A

SO PowerPAD (8)

4.89 mm x 3.90 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us