LT8609EMSE#TRPBF Power Path Management IC Synchronous Step-Down Regulator with 2.5 A Quiescent Current
microchip battery management
,battery charge management ic
LT8609EMSE#TRPBF Power Path Management IC Synchronous Step-Down Regulator with 2.5 A Quiescent Current
FEATURES
n Wide Input Voltage Range: 3.0V to 42V
n Ultralow Quiescent Current Burst Mode® Operation:
n <2.5μA IQ Regulating 12VIN to 3.3VOUT
n Output Ripple <10mVP-P
n High Efficiency 2MHz Synchronous Operation:
n >93% Efficiency at 1A, 5VOUT from 12VIN
n 3A Maximum Continuous Output
n Fast Minimum Switch-On Time: 45ns
n Adjustable and Synchronizable: 200kHz to 2.2MHz n Spread Spectrum Frequency Modulation for Low EMI n Allows Use of Small Inductors
n Low Dropout
n Peak Current Mode Operation
n Accurate 1V Enable Pin Threshold
n Internal Compensation
n Output Soft-Start and Tracking
n Small 10-Lead or 16-Lead MSOP Package
APPLICATIONS
n GSM Transceivers
n General Purpose Step-Down
n Low EMI Step-Down
DESCRIPTION
The LT®8609/LT8609A/LT8609B is a compact, high effi- ciency, high speed synchronous monolithic step-down switching regulator that consumes only 1.7μA of non- switching quiescent current. The LT8609/LT8609A/ LT8609B can deliver 3A of continuous current. Burst Mode operation enables high efficiency down to very low output currents while keeping the output ripple below 10mVP-P. A SYNC pin allows synchronization to an external clock, or spread spectrum modulation for low EMI operation. Internal compensation with peak current mode topology allows the use of small inductors and results in fast transient response and good loop stability. The EN/UV pin has an accurate 1V threshold and can be used to program VIN UVLO or to shut down the part. A capacitor on the TR/SS pin programs the output voltage ramp rate during start-up while the PG flag signals when VOUT is within ±8.5% of the programmed output voltage as well as fault conditions. The LT8609A has slower switch edges for lower EMI emissions. The LT8609B operates in pulse-skipping mode only.

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
![]() |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
![]() |
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
![]() |
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
![]() |
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
![]() |
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
![]() |
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
![]() |
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|