BQ24725ARGRR Power Path Management IC Battery Management 1-4 CELL LI BATT SM BUS CHARGE CONTRLR
power management integrated circuit
,microchip battery management
BQ24725ARGRR Power Path Management IC Battery Management 1-4 CELL LI BATT SM BUS CHARGE CONTRLR
1 Features
- SMBus Host-Controlled NMOS-NMOS Synchronous Buck Converter with Programmable 615kHz, 750kHz, and 885kHz Switching Frequencies
-
Automatic N-channel MOSFET Selection of System Power Source from Adapter or Battery Driven by Internal Charge Pumps
-
Enhanced Safety Features for Over Voltage Protection, Over Current Protection, Battery, Inductor and MOSFET Short Circuit Protection
-
Programmable Input Current, Charge Voltage, Charge Current Limits
-
– ±0.5% Charge Voltage Accuracy up to 19.2V
-
– ±3% Charge Current Accuracy up to 8.128A
-
– ±3% Input Current Accuracy up to 8.064A
-
– ±2% 20x Adapter Current or Charge Current Amplifier Output Accuracy
-
-
Programmable Battery Depletion Threshold, and Battery LEARN Function
-
Programmable Adapter Detection and Indicator
-
Integrated Soft Start
-
Integrated Loop Compensation
-
Real Time System Control on ILIM pin to Limit Charge Current
-
AC Adapter Operating Range 4.5V-24V
-
5μA Off-State Battery Discharge Current
-
0.65mA (0.8mA max) Adapter Standby Quiescent Current
-
20-pin 3.5 x 3.5 mm2 VQFN Package
2 Applications
-
Portable Notebook Computers, UMPC, Ultra-Thin Notebook, and Netbook
-
Handheld Terminal
-
Industrial and Medical Equipment
-
Portable Equipment
3 Description
The bq24725A is a high-efficiency, synchronous battery charger, offering low component count for space-constraint, multi-chemistry battery charging applications.
The bq24725A utilizes two charge pumps to separately drive n-channel MOSFETs (ACFET, RBFET and BATFET) for automatic system power source selection.
SMBus controlled input current, charge current, and charge voltage DACs allow for very high regulation accuracies that can be easily programmed by the system power management micro-controller.
The bq24725A uses internal input current register or external ILIM pin to throttle down PWM modulation to reduce the charge current.
The bq24725A charges one, two, three or four series Li+ cells.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
bq24725A |
VQFN (20) |
3.50mm x 3.50mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|