Send Message
Home > products > Flash Memory IC Chip > BQ29700DSET Power Path Management IC Battery Management Li-Ion/Li Polymer Batt protection IC

BQ29700DSET Power Path Management IC Battery Management Li-Ion/Li Polymer Batt protection IC

manufacturer:
Manufacturer
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Output Voltage:
28 V
Output Current:
5.5 UA
Operating Supply Voltage:
4.5 V To 7 V
Operating Supply Current:
4 UA
Minimum Operating Temperature:
- 40 C
Maximum Operating Temperature:
+ 85 C
Highlight:

battery charge management ic

,

power management integrated circuit

Introduction

BQ29700DSET Power Path Management IC Battery Management Li-Ion/Li Polymer Batt protection IC

 

1 Features

  • Input Voltage Range Pack+: VSS – 0.3 V to 12 V • FET Drive:

– CHG and DSG FET Drive Output

  • Voltage Sensing Across External FETs for Overcurrent Protection (OCP) Is Within ±5 mV (Typical)

  • Fault Detection

    • – Overcharge Detection (OVP)

    • – Over-Discharge Detection (UVP)

    • – Charge Overcurrent Detection (OCC)

    • – Discharge Overcurrent Detection (OCD)

    • – Load Short-Circuit Detection (SCP)

  • Zero Voltage Charging for Depleted Battery

  • Factory Programmed Fault Protection Thresholds

    • – Fault Detection Voltage Thresholds

    • – Fault Trigger Timers

    • – Fault Recovery Timers

  • Modes of Operation Without Battery Charger Enabled

    • – NORMAL Mode ICC = 4 μA

    • – Shutdown Iq = 100 nA

  • Operating Temperature Range TA = –40°C to +85°C

 

2 Applications

• Tablet PC
• Mobile Handset
• Handheld Data Terminals

 

3 Description

The bq2970 battery cell protection device provides an accurate monitor and trigger threshold for overcurrent protection during high discharge/charge current operation or battery overcharge conditions.

The bq2970 device provides the protection functions for Li-Ion/Li-Polymer cells, and monitors across the external power FETs for protection due to high charge or discharge currents. In addition, there is overcharge and depleted battery monitoring and protection. These features are implemented with low current consumption in NORMAL mode operation.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

bq2970, bq2971, bq2972, bq2973(2)

WSON (6)

1.50 mm × 1.50 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us