BQ24040DSQR BQ24040DSQT High Voltage Power Path Management IC 800 MA 30V Input Rating Li Ion Batt Charger
battery charge management ic
,power management integrated circuit
BQ24040DSQR BQ24040DSQT Power Path Management IC Inpt Sg Cl Li-Ion Batt Charger
1 Features
- Charging
- – 1% Charge Voltage Accuracy
- – 10% Charge Current Accuracy
- – Pin Selectable USB 100mA and 500mA Maximum Input Current Limit
- – Programmable Termination and Precharge Threshold, bq24040 and bq24045
- – High voltage (4.35V) Chemistry Support with bq24045
- Protection
- – 30V Input Rating; with 6.6V or 7.1V Input Overvoltage Protection
- – Input Voltage Dynamic Power Management
- – 125°C Thermal Regulation; 150°C Thermal Shutdown Protection
- – OUT Short-Circuit Protection and ISET short detection
- – Operation over JEITA Range via Battery
- NTC – 1/2 Fast-Charge-Current at Cold, 4.06V at Hot, bq24040 and bq24045
- – Fixed 10 Hour Safety Timer, bq24040 and bq24045
- System
- – Automatic Termination and Timer Disable Mode (TTDM) for Absent Battery Pack With Thermistor, bq24040 and bq24045
- – Status Indication – Charging/Done
- – Available in Small 2×2mm2 DFN-10 Package
- – Integrated Auto Start Function for Production Line Testing, bq24041
2 Applications
-
Smart Phones
-
PDAs
-
MP3 Players
-
Low-Power Handheld Devices
3 Description
The bq2404x series of devices are highly integrated Li-Ion and Li-Pol linear chargers devices targeted at space-limited portable applications. The devices operate from either a USB port or AC adapter. The high input voltage range with input overvoltage protection supports low-cost unregulated adapters.
The bq2404x has a single power output that charges the battery. A system load can be placed in parallel with the battery as long as the average system load does not keep the battery from charging fully during the 10 hour safety timer.
The battery is charged in three phases: conditioning, constant current and constant voltage. In all charge phases, an internal control loop monitors the IC junction temperature and reduces the charge current if an internal temperature threshold is exceeded.
The charger power stage and charge current sense functions are fully integrated. The charger function has high accuracy current and voltage regulation loops, charge status display, and charge termination. The pre-charge current and termination current threshold are programmed via an external resistor on the bq24040 and bq24045. The fast charge current value is also programmable via an external resistor.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
bq24040 |
WSON (10) |
2.00 mm x 2.00 mm |
|
bq24041 |
WSON (10) |
2.00 mm x 2.00 mm |
|
bq24045 |
WSON (10) |
2.00 mm x 2.00 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|