TPS73601DBVR Power Path Management IC LDO Voltage Regulators Cap-Free NMOS 400mA
power management integrated circuit
,microchip battery management
TPS73601DBVR Power Path Management IC LDO Voltage Regulators Cap-Free NMOS 400mA
1 Features
- Stable with No Output Capacitor or Any Value or Type of Capacitor
-
Input Voltage Range of 1.7 V to 5.5 V
-
Ultra-Low Dropout Voltage: 75 mV typ
-
Excellent Load Transient Response—with or without Optional Output Capacitor
-
New NMOS Topology Delivers Low Reverse Leakage Current
-
Low Noise: 30 μVRMS typ (10 Hz to 100 kHz)
-
0.5% Initial Accuracy
-
1% Overall Accuracy Over Line, Load, and Temperature
-
Less Than 1 μA max IQ in Shutdown Mode
-
Thermal Shutdown and Specified Min/Max Current Limit Protection
-
Available in Multiple Output Voltage Versions
-
– Fixed Outputs of 1.20 V to 5.0 V
-
– Adjustable Output from 1.20 V to 5.5 V
-
– Custom Outputs Available
-
2 Applications
-
Portable/Battery-Powered Equipment
-
Post-Regulation for Switching Supplies
-
Noise-Sensitive Circuitry such as VCOs
-
Point of Load Regulation for DSPs, FPGAs, ASICs, and Microprocessors
3 Description
The TPS736xx family of low-dropout (LDO) linear voltage regulators uses a new topology: an NMOS pass element in a voltage-follower configuration. This topology is stable using output capacitors with low ESR, and even allows operation without a capacitor. It also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current.
The TPS736xx uses an advanced BiCMOS process to yield high precision while delivering very low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 1 μA and ideal for portable applications. The extremely low output noise (30 μVRMS with 0.1-μF CNR) is ideal for powering VCOs. These devices are protected by thermal shutdown and foldback current limit.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
TPS736xx |
SOT-23 (5) |
2.90 mm x 1.60 mm |
|
SOT-223 (6) |
6.50 mm x 3.50 mm |
|
|
VSON (8) |
3.00 mm x 3.00 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|