TPS61046YFFR Power Path Management IC Switching Voltage Regulators 28-V 400mA Sw Boost Converter
microchip battery management
,power management integrated circuit
TPS61046YFFR Power Path Management IC Switching Voltage Regulators 28-V 400mA Sw Boost Converter
1 Features
- Input Voltage Range: 1.8 V to 5.5 V, 1.6 V after Startup
-
Output Voltage Up to 28 V
-
Integrated Power Diode and Isolation Switch
-
900-mA (typical) Switch Current
-
Up to 85% Efficiency at 3.6-V Input and 12-V Output
-
500-nA Ultra-low Shutdown Current
-
±2% Output Voltage Accuracy
-
Power Save Operation Mode at Light Load
-
Internal 10-ms Soft Start Time
-
True Disconnection between Input and Output during Shutdown
-
Output Short Circuit Protection
-
Output Over-Voltage Protection
-
Thermal Shutdown Protection
-
0.80-mm × 1.20-mm WCSP package
2 Applications
-
PMOLED Power Supply
-
Wearable Devices
-
Portable Medical Equipment
-
Sensor Power Supply
3 Description
The TPS61046 is a highly integrated boost converter designed for applications requiring high voltage and tiny solution size such as PMOLED panel and sensor module. The TPS61046 integrates a 30-V power switch, input/output isolation switch, and power diode. It can output up to 28 V from input of a Li+ battery or two cell alkaline batteries in series.
The TPS61046 operates with a switching frequency at 1.0 MHz. This allows the use of small external components. The TPS61046 has an internal default 12-V output voltage setting by connecting the FB pin to the VIN pin. Thus it only needs three external components to get 12-V output voltage. Together with WCSP package, the TPS61046 gives a very small overall solution size. The TPS61046 has typical 900- mA switch current limit. It has 10-ms built-in soft start time to minimize the inrush current. When the TPS61046 is in shutdown mode, the isolation switch disconnects the output from input to minimize the leakage current. The TPS61064 also implements output short circuit protection, output over-voltage protection and thermal shutdown.
The TPS61046 is available in a 6-pin 0.80-mm x 1.20-mm WCSP package.
Device Information
PART NUMBER | PACKAGE | BODY SIZE (NOM) |
TPS61046 | WCSP (6) | 0.80 mm x 1.20 mm |

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
![]() |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
![]() |
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
![]() |
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
![]() |
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
![]() |
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
![]() |
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
![]() |
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|