BQ24166RGER Lithium Ion Battery Power Path Management IC Separate Power Path Control
battery charge management ic
,power management integrated circuit
BQ24166RGER Power Path Management IC Battery Management Dual-In,Sgl Cell Sw mode LiIon Batt Chrg
1 FEATURES
- High-Efficiency Switch Mode Charger with
- Separate Power Path Control
- – Make a GSM Call with a Deeply Discharged Battery or No Battery
- – Instantly Startup System from a Deeply Discharged Battery or No Battery
- Dual Input Charger
- – 20V Input Rating, With Over-Voltage Protection (OVP)
- – 6.5V for USB Input
- – 10.5V for IN Input
- – Integrated FETs for Up to 2.5A Charge Rate
- – Up to 2.5A from IN Input
- – Up to 1.5A from USB Input
- Highly Integrated Battery N-Channel MOSFET Controller for Power Path Management
- Safe and Accurate Battery Management Functions
- – 0.5% Battery Regulation Accuracy
- – 10% Charge Current Accuracy
- Adjustable Charge Current, Input Current Limit, and VINDPM Threshold (for IN input)
- Easy JEITA Implementation
- – Charge Parameter Selector Inputs (CE1, CE2) for (bq24165)
- Voltage-based, NTC Monitoring Input (TS)
- – Standard Temperature Range (bq24166)
- – JEITA Compatible (bq24167)
- Thermal Regulation Protection for Output Current Control
- Low Battery Leakage Current, BAT Short- Circuit Protection
- Soft-Start Feature to Reduce Inrush Current
- Thermal Shutdown and Protection
- Available in Small 2.8mm x 2.8mm 49-ball WCSP or 4mm x 4mm QFN-24 Packages
2 APPLICATIONS
- Handheld Products
- Portable Media Players
- Portable Equipment
- Netbook and Portable Internet Devices
3 DESCRIPTION
The bq24165, bq24166 and bq24167 are highly integrated single cell Li-Ion battery charger and system power path management devices targeted for space-limited, portable applications with high capacity batteries. The single cell charger has dual inputs which allow operation from either a USB port or higher power input supply (i.e., AC adapter or wireless charging input) for a versatile solution. The two inputs are fully isolated from each other and are managed by the bq24165/166/167 with the IN input having precedence.

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

SKY65336-11 NEW AND ORIGINAL STOCK
Image | Part # | Description | |
---|---|---|---|
![]() |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
![]() |
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
![]() |
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
![]() |
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
![]() |
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
![]() |
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
![]() |
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
![]() |
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|