AD633JNZ Analog Multiplier circuit components Total error within 2%
electronic integrated circuit
,linear integrated circuits
Low Cost Analog Multiplier AD633
FEATURES
- 4-quadrant multiplication
- Low cost, 8-lead SOIC and PDIP packages
- Complete—no external components required
- Laser-trimmed accuracy and stability
- Total error within 2% of full scale
- Differential high impedance X and Y inputs
- High impedance unity-gain summing input
- Laser-trimmed 10 V scaling reference
APPLICATIONS
- Multiplication, division, squaring
- Modulation/demodulation, phase detection
- Voltage-controlled amplifiers/attenuators/filters
GENERAL DESCRIPTION
The AD633 is a functionally complete, four-quadrant, analog multiplier. It includes high impedance, differential X and Y inputs, and a high impedance summing input (Z). The low impedance output voltage is a nominal 10 V full scale provided by a buried Zener. The AD633 is the first product to offer these features in modestly priced 8-lead PDIP and SOIC packages.
The AD633 is laser calibrated to a guaranteed total accuracy of 2% of full scale. Nonlinearity for the Y input is typically less than 0.1% and noise referred to the output is typically less than 100 μV rms in a 10 Hz to 10 kHz bandwidth. A 1 MHz bandwidth, 20 V/μs slew rate, and the ability to drive capacitive loads make the AD633 useful in a wide variety of applications where simplicity and cost are key concerns.
The versatility of the AD633 is not compromised by its simplicity. The Z input provides access to the output buffer amplifier, enabling the user to sum the outputs of two or more multipliers, increase the multiplier gain, convert the output voltage to a current, and configure a variety of applications.
The AD633 is available in 8-lead PDIP and SOIC packages. It is specified to operate over the 0°C to 70°C commercial temperature range (J Grade) or the −40°C to +85°C industrial temperature range (A Grade).
PRODUCT HIGHLIGHTS
- The AD633 is a complete four-quadrant multiplier offered in low cost 8-lead SOIC and PDIP packages. The result is a product that is cost effective and easy to apply.
- No external components or expensive user calibration are required to apply the AD633.
- Monolithic construction and laser calibration make the device stable and reliable.
- High (10 MΩ) input resistances make signal source loading negligible.
- Power supply voltages can range from ±8 V to ±18 V. The internal scaling voltage is generated by a stable Zener diode; multiplier accuracy is essentially supply insensitive.
ABSOLUTE MAXIMUM RATINGS
Parameter | Rating |
Supply Voltage | ±18 V |
Internal Power Dissipation | 500 mW |
Input Voltages1 | ±18 V |
Output Short-Circuit Duration | Indefinite |
Storage Temperature Range | −65°C to +150°C |
Operating Temperature Range AD633J AD633A |
0°C to 70°C −40°C to +85°C |
Lead Temperature (Soldering, 60 sec) | 300°C |
ESD Rating | 1000 V |
1 For supply voltages less than ±18 V, the absolute maximum input voltage is equal to the supply voltage.
Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. This is a stress rating only; functional operation of the device at these or any other conditions above those indicated in the operational section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability.
PIN CONFIGURATIONS
Stock Offer (Hot Sell)
Part no. | Quantity | Brand | D/C | Package |
X28HC256P-15 | 500 | XICOR | 13+ | DIP-28 |
OB2252MP | 30000 | ON-BRIGHT | 16+ | SOT-23 |
MC145443P | 7787 | ON | 14+ | DIP |
ATMEGA8-16AU | 6590 | ATMEL | 16+ | QFP32 |
MAX232IDR | 8250 | TI | 14+ | SOP |
36MB160A | 2036 | IR | 15+ | MODULE |
MC908JK3ECDWE | 4438 | FREESCALE | 13+ | SOP-20 |
0263005.WRT | 2800 | LITTELFUSE | 04+ | DIP |
PIC16F73-I/SP | 4998 | MICROCHIP | 16+ | DIP |
A6281EESTR-T | 1000 | ALLEGRO | 12+ | QFN-16 |
M25P10-VMN6TP | 10000 | ST | 16+ | SOP |
MAX809STRG | 30000 | ON | 14+ | SOT |
LM2940IMP-12 | 3982 | NSC | 14+ | SOT-223 |
OPA690IDBVR | 8140 | TI | 16+ | SOT23-6 |
CS82C54-10Z96 | 1893 | INTERSI | 10+ | PLCC |
LP2981-33DBVR | 6048 | TI | 15+ | SOT-23-5 |
LM4120AIM5X-3.0 | 894 | TI | 15+ | SOT-23-5 |
30460* | 1246 | BOSCH | 10+ | QFP-64 |
LPC3250FET296/01 | 1252 | 15+ | QFP | |
30621* | 327 | BOSCH | 13+ | QFP-64 |
PIC24HJ128GP306-I/PT | 4113 | MICROCHIP | 14+ | QFP |
PIC16F873-I/SO | 4893 | MICROCHIP | 16+ | SOP |
L9616D | 3785 | ST | 15+ | SOP8 |
LM7818CT | 7181 | NSC | 14+ | TO-220 |
2MBI100N-060 | 418 | FUJI | 12+ | MODULE |
PMBS3904 | 60000 | 14+ | SOT-23 | |
MT41K128M16JT-125:K | 7044 | MICRON | 14+ | BGA |
P80C31BH-1 | 9620 | INTEL | 16+ | DIP |
LXT906PC | 4933 | LEVELONE | 16+ | PLCC |
LTC3440EMS | 6740 | LT | 16+ | MSOP |