MUR420RLG High Speed Switching Diode Switchmode Tm Power Rectifiers
bridge rectifier circuit
,signal schottky diode
MUR420RLG High Speed Switching Diode Switchmode Tm Power Rectifiers
ULTRAFAST RECTIFIERS
4.0 AMPERES, 50−600 VOLTS
These state−of−the−art devices are a series designed for use in switching power supplies, inverters and as free wheeling diodes.
Features
• Ultrafast 25 ns, 50 ns and 75 ns Recovery Times
• 175°C Operating Junction Temperature
• Low Forward Voltage
• Low Leakage Current
• High Temperature Glass Passivated Junction
• Reverse Voltage to 600 V
• Shipped in Plastic Bags, 500 per Bag
• Available in Tape and Reel, 1500 per Reel, by Adding a “RL’’ Suffix to the Part Number
• Pb−Free Packages are Available*
Mechanical Characteristics:
• Case: Epoxy, Molded
• Weight: 1.1 Gram (Approximately)
• Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
• Lead Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
• Polarity: Cathode indicated by Polarity Band
MAXIMUM RATINGS
Rating | Symbol | MUR | Unit | |||||
405 | 410 | 415 | 420 | 440 | 460 | |||
Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage |
VRRM VRWM VR |
50 | 100 | 150 | 200 | 400 | 600 | V |
Average Rectified Forward Current (Square Wave) (Mounting Method #3 Per Note 2) |
IF(AV) | 4.0 @ TA = 80°C |
4.0 @ TA = 40°C |
A | ||||
Nonrepetitive Peak Surge Current (Surge applied at rated load conditions, half wave, single phase, 60 Hz) |
IFSM | 125 | 110 | A | ||||
Operating Junction Temperature & Storage Temperature | TJ, Tstg | -65 to +175 | °C |
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect device reliability.
MARKING DIAGRAM
PACKAGE DIMENSIONS
AXIAL LEAD
CASE 267−05
(DO−201AD)
ISSUE G
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes
Image | Part # | Description | |
---|---|---|---|
0402 0.063W 10kOhm SMT Thick Film Chip Resistor RC0402JR-0710KL |
10 kOhms ±5% 0.063W, 1/16W Chip Resistor 0402 (1005 Metric) Moisture Resistant Thick Film
|
||
200MHz MPZ1608S300ATAH0 Chip Beads 5A For Power Line TDK SMD0603 |
30 Ohms 1 Power Line Ferrite Bead 0603 (1608 Metric) 5A 10mOhm
|
||
22R 5% SMD0402 Film Chip Resistors ERJ-2GEJ220X PANASONIC |
22 Ohms ±5% 0.1W, 1/10W Chip Resistor 0402 (1005 Metric) Automotive AEC-Q200 Thick Film
|
||
MOV-20D751K 750V 6.5kA Varistor blue SMD Chip Resistor 1 Circuit Through Hole Disc 20mm |
750 V 6.5 kA Varistor 1 Circuit Through Hole Disc 20mm
|
||
2SB1261-TP 10W General Purpose Rectifier Diode Silicon Epitaxial Planar Pnp Transistor |
Bipolar (BJT) Transistor PNP 60 V 3 A 50MHz 1 W Surface Mount D-Pak
|
||
IXFK140N30P Polar Power Mosfet Hiperfet TO264 300V 140A |
N-Channel 300 V 140A (Tc) 1040W (Tc) Through Hole TO-264AA (IXFK)
|
||
DF2B29FU,H3F TVS 24VWM 47V ESD Protection Diodes |
47V Clamp 3A (8/20µs) Ipp Tvs Diode Surface Mount USC
|
||
PMEG6010ER 1A Low VF MEGA Schottky Barrier Rectifier SOD123 |
Diode 60 V 1A Surface Mount SOD-123W
|
||
SK34SMA 3A SMD Schottky Barrier Rectifier Diodes DO - 214AC |
Diode 40 V 3A Surface Mount DO-214AC, SMA
|
||
SMBJ5.0A Silicon Avalanche Diodes 600W Surface Mount TVS Diodes |
9.2V Clamp 65.3A Ipp Tvs Diode Surface Mount DO-214AA (SMBJ)
|