Send Message
Home > products > Power Management ICs > L6599D Integrated Circuit Chip New & Original High-voltage resonant controller

L6599D Integrated Circuit Chip New & Original High-voltage resonant controller

manufacturer:
Manufacturer
Description:
Power Supply Controller Resonant Converter Controller 16-SO
Category:
Power Management ICs
Price:
Negotiate
Payment Method:
T/T, Western Union, Paypal
Specifications
Max. Thermal Resistance Junction To Ambient (DIP16):
80 °C/W
Max. Thermal Resistance Junction To Ambient (SO16):
120 °C/W
Storage Temperature Range:
-55 To 150 °C
Junction Operating Temperature Range:
-40 To 150 °C
Recommended Max. Power Dissipation @TA = 70°C (DIP16):
1 W
Recommended Max. Power Dissipation @TA = 50°C (SO16):
0.83 W
Highlight:

electronics ic chip

,

integrated circuit ic

Introduction

 
High-voltage resonant controller
 
Features
■ 50% duty cycle, variable frequency control of resonant half-bridge
■ High-accuracy oscillator
■ Up to 500kHz operating frequency
■ Two-level OCP: frequency-shift and latched shutdown
■ Interface with PFC controller
■ Latched disable input
■ Burst-mode operation at light load
■ Input for power-ON/OFF sequencing or brownout protection
■ Non-linear soft-start for monotonic output voltage rise
■ 600V-rail compatible high-side gate driver with integrated bootstrap diode and high dV/dt immunity
■ -300/800mA high-side and low-side gate drivers with UVLO pull-down
■ DIP-16, SO-16N packages
 
Applications
■ LCD & PDP TV
■ Desktop PC, entry-level server
■ Telecom SMPS
■ AC-DC adapter, open frame SMPS
 
Order code

Part numberPackagePackaging
L6599DSO-16NTube
L6599TRSO-16NTape and reel
L6599NDIP-16Tube

 
 
         DIP-16                        SO-16N
 
Device description
The L6599 is a double-ended controller specific for the resonant half-bridge topology. It provides 50% complementary duty cycle: the high-side switch and the low-side switch are driven ON 180° out-of-phase for exactly the same time.
Output voltage regulation is obtained by modulating the operating frequency. A fixed deadtime inserted between the turn-OFF of one switch and the turn-ON of the other one guarantees soft-switching and enables high-frequency operation.
To drive the high-side switch with the bootstrap approach, the IC incorporates a high-voltage floating structure able to withstand more than 600V with a synchronous-driven high-voltage DMOS that replaces the external fast-recovery bootstrap diode.
The IC enables the designer to set the operating frequency range of the converter by means of an externally programmable oscillator.
At start-up, to prevent uncontrolled inrush current, the switching frequency starts from a programmable maximum value and progressively decays until it reaches the steady-state value determined by the control loop. This frequency shift is non linear to minimize output voltage overshoots; its duration is programmable as well.
The IC can be forced to enter a controlled burst-mode operation at light load, so as to keep converter's input consumption to a minimum.
IC's functions include a not-latched active-low disable input with current hysteresis useful for power sequencing or for brownout protection, a current sense input for OCP with frequency shift and delayed shutdown with automatic restart.
A higher level OCP latches off the IC if the first-level protection is not sufficient to control the primary current. Their combination offers complete protection against overload and short circuits. An additional latched disable input (DIS) allows easy implementation of OTP and/or OVP.
An interface with the PFC controller is provided that enables to switch off the pre-regulator during fault conditions, such as OCP shutdown and DIS high, or during burst-mode operation.
 
Absolute maximum ratings

SymbolPinParameterValueUnit
VBOOT16Floating supply voltage-1 to 618V
VOUT14Floating ground voltage-3 to VBOOT -18V
dVOUT /dt14Floating ground max. slew rate50V/ns
VCC12IC Supply voltage (ICC ≤ 25 mA)Self-limitedV
VPFC_STOP9Maximum voltage (pin open)-0.3 to VCCV
IPFC_STOP9Maximum sink current (pin low)Self-limitedA
VLINEmax7Maximum pin voltage (Ipin ≤1mA)Self-limitedV
IRFmin4Maximum source current2mA
 1 to 6, 8Analog inputs & outputs-0.3 to 5V

Note: ESD immunity for pins 14, 15 and 16 is guaranteed up to 900V
 
Block diagram
 
 
Pin Connection (Top view)
 
 
Stock Offer (Hot Sell)

Part NO.Q'tyMFGD/CPackage
AD8607ARMZ17095AD15+MSOP-8
LM358MX16950NSC14+SOP-8
MX25L1605AM2C-15G16760MXIC09+SOP
ADC10154CIWM16467NSC15+SOP
ADM1085AKSZ-REEL716328AD15+SC70-6
ADP3334ARZ16153AD14+SOP8
ZTX75116060ZETEX15+TO-92
ADM706RARZ16016AD15+SOP8
MAX809SEUR+T16000MAXIM14+SOT
ADP3806JRUZ-12.5-R715839AD15+SSOP24
LMV393MX15680NSC14+SOP-8
ADS1100A1IDBVR15525TI15+SOT23-6
ATF-55143-TR1G15298AVAGO14+SOT343
AGN200A12Z15211PANASONIC14+SMD
L78L08ACZ15010ST15+TO-92
LM339AM15005NSC14+SOP-14
ZJYS81R5-2PL51T-G0115000TDK15+SMD
ZJYS81R5-2PL25-G0115000TDK15+SMD
LM4040AIM3X-2.515000NSC15+SOT-23
LA7814115000SANYO15+TO-220

 

Send RFQ
Stock:
MOQ:
10pcs