L297D Integrated Circuit Chip STEPPER MOTOR CONTROLLERS
electronics ic chip
,integrated circuit components
STEPPER MOTOR CONTROLLERS
►NORMAL/WAWE DRIVE
►HALF/FULL STEP MODES
►CLOCKWISE/ANTICLOCKWISE DIRECTION
►SWITCHMODE LOAD CURRENT REGULATION ►PROGRAMMABLE LOAD CURRENT
►FEW EXTERNAL COMPONENTS
►RESET INPUT & HOME OUTPUT
►ENABLE INPUT
DESCRIPTION
The L297/A/D Stepper Motor Controller IC generates four phase drive signals for two phase bipolar and four phase unipolar step motors in microcomputer-controlled applications. The motor can be driven in half step, normal and wawe drive modes and on-chip PWM chopper circuits permit switchmode control of the current in the windings. A feature of this device is that it requires only clock, direction and mode input signals. Since the phase are generated internally the burden on the microprocessor,and theprogrammer,is greatlyreduced. Mounted in DIP20 and SO20 packages, the L297 can be used with monolithic bridge drives such as the L298N or L293E, or with discrete transistors and darliCM GROUPons.
ABSOLUTE MAXIMUM RATINGS
| Symbol | Parameter | Value | Unit |
| Vs | Supply voltage | 10 | V |
| Vi | Input signals | 7 | V |
| Ptot | Total power dissipation (Tamb = 70°C) | 1 | W |
| Tstg, Tj | Storage and junction temperature | -40 to + 150 | °C |
TWO PHASE BIPOLAR STEPPER MOTOR CONTROL CIRCUIT
PIN CONNECTION (Top view)
| Image | Part # | Description | |
|---|---|---|---|
|
|
A3977SEDTR Power Stepper Motor Driver DMOS 5V 44 Pin PLCC Tube 3 MSL Level |
Bipolar Motor Driver DMOS Logic 44-PLCC (16.59x16.59)
|