TS3USBA225RUTR Ethernet Switch IC USB Switch ICs DP3T USB 2.0 HIGH- SPEED
ethernet transceiver ic
,fast ethernet switch chip
TS3USBA225RUTR Ethernet Switch IC USB Switch ICs DP3T USB 2.0 HIGH- SPEED
1 Features
- 2.7-V to 5.0-V Operating Power Supply (VCC)
-
MHL/High-Speed USB (480 Mbps) Switch:
-
– V I/O Accepts Signals up to 4.5 V (Independent of VCC)
-
– 6.5 Ω rON Typical
-
– 3 pF CON Typical
-
– 1.9 GHz Bandwidth (–3 dB)
-
-
Audio Switch:
-
– 2.5 Ω rON Typical
-
– Negative Rail Capability down to –1.8 V
-
– Low THD: < 0.05%
-
– Internal Shunt Resistors for Click-and-Pop Reduction
-
-
1.8-V Compatible Control Input (SEL1 and SEL2) Threshold
-
Minimized Current Consumption (~5 μA) in Power-Down Mode
-
Power-Off Protection: All I/O Pins are High-Z when VCC= 0 V
-
12-Pin QFN Package (2 mm × 1.7 mm, 0.4 mm Pitch)
-
ESD Performance Tested per JESD 22
-
– 2000 V Human-Body Model
(A114-B, Class II)
-
– 1000 V Charged-Device Model (C101)
-
2 Applications
• Cell phones and Smartphones • Tablet PCs
• Portable Instrumentation
• Digital Still Cameras
• Portable Navigation Devices (GPS)
• USB 2.0, MIPI (CSI/DSI), LVDS Switching
3 Description
The TS3USBA225 is a 2-channel single-pole triple- throw (SP3T) multiplexer that supports USB 2.0 High- Speed (480 Mbps) signals in all 3 differential channels. The first two high-speed differential channels also support Mobile High Definition Link (MHL) signaling with resolution and video frame rates up to 720p, 60 fps and 1080i, 30 fps. The remaining differential channel can also be used as an audio switch that is designed to allow analog audio signals to swing negatively. This configuration allows the system designer to use a common connector for audio and USB 2.0 or MHL data.
The TS3USBA225 has a VCC range of 2.7 V to 5.0 V with the capability to pass true-ground audio signals down to –1.8 V. The device also supports a power- down mode that can be enabled when both SEL1 and SEL2 controls are low to minimize current consumption when no signal is transmitting. The TS3USBA225 also features internal shunt resistors on the audio path to reduce clicks and pops that may be heard when the audio switches are selected.
Device Information
|
PART NUMBER |
PACKAGE |
BODY SIZE (NOM) |
|
TS3USBA225 |
UQFN (12) |
2.00 mm × 1.70 mm |
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK
IR2110PBF NEW AND ORIGINAL STOCK
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520
MAX485, RS485 Module TTL To RS-485 Module TTL To 485
SKY65336-11 NEW AND ORIGINAL STOCK
| Image | Part # | Description | |
|---|---|---|---|
|
|
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI |
FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
|
|
|
|
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK |
FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
|
|
|
|
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK |
dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
|
|
|
|
IR2110PBF NEW AND ORIGINAL STOCK |
Half-Bridge Gate Driver IC Non-Inverting 14-DIP
|
|
|
|
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip |
FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit |
FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
|
|
|
|
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520 |
N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
|
|
|
|
MAX485, RS485 Module TTL To RS-485 Module TTL To 485 |
1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
|
|
|
|
SKY65336-11 NEW AND ORIGINAL STOCK |
RF Front End 2.4GHz ISM 28-MCM (8x8)
|