Send Message
Home > products > Flash Memory IC Chip > LM50CIM3/NOPB HVAC Temperature Sensors Board Mount Temperature Sensors -40 To +125C Sot23 Temp Sensor

LM50CIM3/NOPB HVAC Temperature Sensors Board Mount Temperature Sensors -40 To +125C Sot23 Temp Sensor

LM50CIM3/NOPB HVAC Temperature Sensors Board Mount Temperature Sensors -40 To +125C Sot23 Temp Sensor
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Output Type:
Analog
Configuration:
Local
Accuracy:
+/- 4 C
Supply Voltage - Min:
4 V
Supply Voltage - Max:
10 V
Shutdown:
No Shutdown
Highlight:

temperature sensor circuit

,

temperature control sensor

Introduction

LM50CIM3/NOPB HVAC Temperature Sensors Board Mount Temperature Sensors -40 To +125C Sot23 Temp Sensor

 

1 Features

  • LM50-Q1 is AEC-Q100 Grade 1 Qualified and is Manufactured on an Automotive Grade Flow
  • Calibrated Directly in Degrees Celsius (Centigrade)

  • Linear + 10 mV/°C Scale Factor

  • ±2°C Accuracy Specified at 25°C

  • Specified for Full –40° to 125°C Range

  • Suitable for Remote Applications

  • Low Cost Due to Wafer-Level Trimming

  • Operates From 4.5 V to 10 V

  • Less Than 130-μA Current Drain

  • Low Self-Heating: Less Than 0.2°C in Still A

  • Nonlinearity Less Than 0.8°C Over Temp

  • UL Recognized Component

     

2 Applications

  • Automotive

  • Computers

  • Disk Drives

  • Battery Management

  • FAX Machines

  • Printers

  • Portable Medical Instruments

  • HVAC

  • Power Supply Modules

 

3 Description

The LM50 and LM50-Q1 devices are precision integrated-circuit temperature sensors that can sense a –40°C to 125°C temperature range using a single positive supply. The output voltage of the device is linearly proportional to temperature (10 mV/°C) and has a DC offset of 500 mV. The offset allows reading negative temperatures without the need for a negative supply.

The ideal output voltage of the LM50 or LM50-Q1 ranges from 100 mV to 1.75 V for a –40°C to 125°C temperature range. The LM50 and LM50-Q1 do not require any external calibration or trimming to provide accuracies of ±3°C at room temperature and ±4°C over the full –40°C to 125°C temperature range. Trimming and calibration of the LM50 and LM50-Q1 at the wafer level assure low cost and high accuracy. The linear output, 500 mV offset, and factory calibration of the LM50 and LM50-Q1 simplify the circuitry requirements in a single supply environment where reading negative temperatures is necessary. Because the quiescent current of the LM50 and LM50-Q1 is less than 130 μA, self-heating is limited to a very low 0.2°C in still air.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

LM50, LM50-Q1

SOT-23 (3)

2.92 mm × 1.30 mm

Send RFQ
Stock:
MOQ:
Contact us