ADIS16375BMLZL HVAC Temperature Sensors Inertial Measurement Units Hi Performance IMU
temperature sensor circuit
,temperature control sensor
ADIS16375BMLZL HVAC Temperature Sensors Inertial Measurement Units Hi Performance IMU
FEATURES
- Triaxis digital gyroscope, ±300°/sec Tight orthogonal alignment: 0.05°
- Triaxis digital accelerometer: ±18 g Delta-angle/velocity calculations
- Wide sensor bandwidth: 330 Hz
- High sample rate: 2.460 kSPS
- Autonomous operation and data collection
- No external configuration commands required
- Startup time: 500 ms
- Factory calibrated sensitivity, bias, and axial alignment
- Calibration temperature range: −40°C to +85°C SPI-compatible serial interface
- Embedded temperature sensor
- Programmable operation and control
- Automatic and manual bias correction controls
- 4 FIR filter banks, 120 configurable taps
- Digital I/O: data-ready, alarm indicator, external clock Alarms for condition monitoring
- Power-down/sleep mode for power management Enable external sample clock input: up to 2.25 kHz Single-command self test
- Single-supply operation: 3.3 V
- 2000 g shock survivability
- Operating temperature range: −40°C to +105°C
APPLICATIONS
- Precision instrumentation Platform stabilization and control Industrial vehicle navigation Downhole instrumentation Robotics
GENERAL DESCRIPTION
The ADIS16375 iSensor® is a complete inertial system that includes a triaxis gyroscope and triaxis accelerometer. Each sensor in the ADIS16375 combines industry-leading iMEMS® technology with signal conditioning that optimizes dynamic performance. The factory calibration characterizes each sensor for sensitivity, bias, alignment, and linear acceleration (gyro bias). As a result, each sensor has its own dynamic compensation formulas that provide accurate sensor measurements over a temperature range of −40°C to +105°C.
The ADIS16375 provides a simple, cost-effective method for integrating accurate, multiaxis, inertial sensing into industrial systems, especially when compared with the complexity and investment associated with discrete designs. All necessary motion testing and calibration are part of the production process at the factory, greatly reducing system integration time. Tight orthogonal alignment simplifies inertial frame alignment in navigation systems. An improved SPI interface and register structure provide faster data collection and configuration control.
This compact module is approximately 44 mm × 47 mm × 14 mm and provides a flexible connector interface that enables multiple mounting orientation options.