Send Message
Home > products > Flash Memory IC Chip > LP3982ILD-ADJ/NOPB Power Regulator IC LDO LW- NO 300MA CMOS REG

LP3982ILD-ADJ/NOPB Power Regulator IC LDO LW- NO 300MA CMOS REG

manufacturer:
Manufacturer
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Package / Case:
WSON-8
Mounting Style:
SMD/SMT
Output Voltage:
1.25 V To 6 V
Output Current:
0.3 A
Number Of Outputs:
1 Output
Polarity:
Positive
Highlight:

digital voltage regulator ic

,

electronic voltage regulator circuit

Introduction

LP3982ILD-ADJ/NOPB Power Regulator IC LDO LW- NO 300MA CMOS REG

 

1 Features

  • 2.5-V to 6-V Input Range
  • MAX8860 Pin, Package, and Specification

    Compatible

  • 300-mA Output Current

  • 120-mV Typical Dropout at 300 mA

  • 90-μA Typical Quiescent Current

  • 1-nA Typical Shutdown Mode

  • 60-dB Typical PSRR

  • 120-μs Typical Turnon Time

  • Stable With Small Ceramic Output Capacitors

  • 37-μVRMS Output Voltage Noise

    (10 Hz to 100 kHz)

  • Overtemperature/Overcurrent Protection

  • ±2% Output Voltage Tolerance

  • Create a Custom Design Using the LP3982 With the WEBENCH® Power Designer

 

2 Applications

  • Wireless Handsets

  • DSP Core Power

  • Battery Powered Electronics

  • Portable Information Appliances

 

3 Description

The LP3982 low-dropout (LDO) CMOS linear regulator is available in 1.8-V, 2.5-V, 2.82-V, 3-V, 3.3-V, and adjustable versions. They deliver 300 mA of output current. Packaged in an 8-pin VSSOP, the LP3982 is pin- and package-compatible with Maxim's MAX8860. The LM3982 is also available in the small footprint WSON package.

The LP3982 suits battery-powered applications because of its shutdown mode (1 nA typical), low quiescent current (90 μA typical), and LDO voltage (120 mV typical). The low dropout voltage allows for more utilization of a battery’s available energy by operating closer to its end-of-life voltage. The LP3982 device's PMOS output transistor consumes relatively no drive current compared to PNP LDO regulators.

This PMOS regulator is stable with small ceramic capacitive loads (2.2 μF typical).

These devices also include regulation fault detection, a bandgap voltage reference, constant current limiting, and thermal-overload protection.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

LP3982

WSON (8)

2.50 mm × 3.00 mm

VSSOP (8)

3.00 mm × 3.00 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us