Send Message
Home > products > Flash Memory IC Chip > LM809M3X-4.63/NOPB Power Path Management IC Supervisory Circuits 3-Pin Microprocessor Reset Circuits

LM809M3X-4.63/NOPB Power Path Management IC Supervisory Circuits 3-Pin Microprocessor Reset Circuits

manufacturer:
Manufacturer
Description:
Supervisor Push-Pull, Totem Pole 1 Channel SOT-23-3
Category:
Flash Memory IC Chip
Price:
Contact us
Payment Method:
Paypal, Western Union, TT
Specifications
Threshold Voltage:
4.63 V
Number Of Inputs Monitored:
1 Input
Output Type:
Active-low,Push-pull
Manual Reset:
No Manual Reset
Watchdog Timers:
No Watchdog
Reset Delay Time:
840 Ms
Highlight:

battery charge management ic

,

power management integrated circuit

Introduction

LM809M3X-4.63/NOPB Power Path Management IC Supervisory Circuits 3-Pin Microprocessor Reset Circuits

 

1 Features

  • Precision Monitoring of Supply Voltages – Available Threshold Options:

2.63 V, 2.93 V, 3.08 V, 4.38 V, 4.63 V

  • Superior Upgrade to MAX809 and MAX810

  • Fully Specified Over Temperature

  • 140-ms Minimum Power-On Reset Pulse Width, 240-ms Typical

    • – Active-Low RESET Output (LM809)

    • – Active-High RESET Output (LM810)

  • Ensured RESET Output Valid for VCC ≥ 1 V

  • Low Supply Current, 15-μA Typical

  • Power Supply Transient Immunity

     

2 Applications

  • Factory Automation

  • Building Automation

  • Programmable Logic Control

  • Renewable Energy

  • Microprocessor Systems

  • Computers

  • Controllers

  • Intelligent Instruments

  • Portable/Battery-Powered Equipment

  • Automotive

 

3 Description

The LM809 and LM810 microprocessors supervisory circuits can be used to monitor the power supplies in microprocessor and digital systems. They provide a reset to the microprocessor during power-up, power- down and brown-out conditions.

The function of the LM809 and LM810 are to monitor the VCC supply voltage, and assert a reset signal whenever this voltage declines below the factory- programmed reset threshold. The reset signal remains asserted for 240 ms after VCC rises above the threshold. The LM809 has an active-low RESET output, while the LM810 has an active-high RESET output.

Seven standard reset voltage options are available, suitable for monitoring 5-V, 3.3-V, and 3-V supply voltages.

With a low supply current of only 15 μA, the LM809 and LM810 are ideal for use in portable equipment.

Device Information

PART NUMBER

PACKAGE

BODY SIZE (NOM)

LM809, LM810

SOT-23 (3)

2.92 mm × 1.30 mm

Related Products
Image Part # Description
W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

W25N01GVZEIG SLC Nand Flash Memory IC 3V 1G BIT Winbond TW SPI

FLASH - NAND (SLC) Memory IC 1Gbit SPI - Quad I/O 104 MHz 7 ns 8-WSON (8x6)
PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

PF48F4400P0VBQEK NEW AND ORIGINAL STOCK

FLASH - NOR (MLC) Memory IC 512Mbit CFI 52 MHz 110 ns 64-LBGA (11x13)
DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

DSPIC30F3011-30I/PT Flash Memory IC NEW AND ORIGINAL STOCK

dsPIC dsPIC™ 30F Microcontroller IC 16-Bit 30 MIPs 24KB (8K x 24) FLASH 44-TQFP (10x10)
IR2110PBF NEW AND ORIGINAL STOCK

IR2110PBF NEW AND ORIGINAL STOCK

Half-Bridge Gate Driver IC Non-Inverting 14-DIP
S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

S25FL032P0XMFI010 SOP8 104MHz Flash Memory IC Chip

FLASH - NOR Memory IC 32Mbit SPI - Quad I/O 104 MHz 8-SOIC
W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

W25Q80DVSNIG Serial Flash Chip 3V 8M BIT Dual Quad Spi Memory Integrated Circuit

FLASH - NOR Memory IC 8Mbit SPI - Quad I/O 104 MHz 8-SOIC
MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

MOS Tube Field Effect Single-Chip Drive PWM Controlador Module IRF520

N-Channel 100 V 9.2A (Tc) 60W (Tc) Through Hole TO-220AB
MAX485, RS485 Module TTL To RS-485 Module TTL To 485

MAX485, RS485 Module TTL To RS-485 Module TTL To 485

1/1 Transceiver Half RS422, RS485 8-uMAX/uSOP
SKY65336-11 NEW AND ORIGINAL STOCK

SKY65336-11 NEW AND ORIGINAL STOCK

RF Front End 2.4GHz ISM 28-MCM (8x8)
Send RFQ
Stock:
MOQ:
Contact us